IOTAVX SA 3 - Specification

SA 3 Owner Manual 12
Specification
ITEM
SPECIFICATIONS
Amplifier:
Continuous Power Output (Stereo)
50 Watts x 2CH (20Hz - 20kHz, <0.07%, 8Ω)
100 Watts x 2CH (20Hz - 20kHz, <0.07%, 4Ω)
Continuous Power Output （ Mono/
Bridged )
100 Watts x 1CH (20Hz - 20kHz, <0.07%, 8Ω)
180 Watts x 1CH (20Hz - 20kHz, <0.07%, 4Ω)
Total Harmonic Distortion
< 0.02% @ 1kHz
Frequency Response
20Hz - 100kHz
Input Sensitivity - Line Inputs
200mV
Input Sensitivity – Phono Input
2.5mV
Input Overload - Line Inputs
4V
Signal to Noise Ratio (IHF “A”
Weighted)
> 100dB
Channel Separation - Line Inputs
> 80dB
General:
Standby Power Consumption
< 0.5W
Power Requirements - AC
AC230V / 50Hz, AC115V / 60Hz SELECTABLE
Power Consumption
220W Maximum
Dimensions - Main Unit
432mm x 240mm x 59mm (W x D x H)
Weight - Main Unit
6.5Kg
*Design and specifications are subject to change without notice.
This symbol marked on the product and instruction manual means that your electrical and electronic
equipment should always be disposed of at the end of its life separately from your general household waste.
EN