Copyright © 2020 IoTecha Corp. All rights reserved.
52
d. A pulsing blue LED shows that charging is temporarily paused. Wait for charging to restart
and complete. Charging is complete when the LED shows steady green.
3. Charging is complete. Remove the cable from the vehicle, wrap it around the outside of the
charger, and place the charge coupler in the holder on the side of the charger.
Troubleshooting
Color Pattern State
Blue
Pulsing
Charging has paused. Wait for charging to resume (green LED).
Orange
Steady Authentication failed. Retry authentication. If vehicle connected, unplug and re-
plug.
Bouncing
Cannot establish remote server connection. Charging is not possible.
Red
Steady
Charger out of service.
To Next Page
Loading...