24/37
2. SSID：Based on AP setting.
3. Channel：This is used only when the user selects Ad-hoc mode
in order to avoid conflict.
4. Security：It supports “None”, “WEP”, “WPA-PSK” security
encryption based on the setting of the Router.
5. WEP:
z Authentication：There are Open System and Shared Keys,
it is based on different encryptions. This has to be the
same as the Router’s setting.
z Encryption：There are 64 bits and 128 bits. This is based
on Key Type based on the Router’s setting.
z Key Type：There are HEX and ASCII. When selecting HEX,
the user only can input 0~9 characters and use A, B, C, D,
E, and F.
z When selecting ASCII, the user can input any character.
(Case sensitive)
z Key 1~4：Based on Key Type to input characters.
6. WPA-PSK：
z Encryption：There are TKIP and AES.
z Pre-Shared Key：Allow any characters. (Case sensitive)
To Next Page
