35
Note: UPnP must be enabled on your computer.
Please follow the procedure to activate UPnP:
<Approach 1>
1. open the Control Panel from the Start Menu
2. Select Add/Remove Programs
3. Select Add/Remove Windows Components and open
Networking Services section
4. Click Details and select UPnP to setup the service
5. The IP device icon will be added to “MY Network Places”
6. The user may double click the IP device icon to access IE
browser
<Approach 2>
1. Open "My Network Space"
2. Click "Show icons for networked UPnP devices" in the tasks
column on the left of the page.
3. Windows may ask your confirmation for enabling the
components. Click "Yes".
To Next Page
Loading...