38
Multicast Setting (Based on the RTSP Server)
Multicast is a bandwidth conservation technology. This function
allows several users to share the same packet sent from the IP
camera.
For using Multicast, appoint here an IP Address and port. TTL
means the life time of packet, the larger the value is, the more users
can receive the packet.
For using Multicast, be sure to enable the function "Force Multicast
RTP via RTSP" in your media player. Then key in the RTSP path of
your camera: "rtsp ://( IP address)/" to receive the multicast.
ONVIF
To Next Page
Loading...