IPC 2000 - User Manual

Installation Hotline • 866.EZINPRO
Inprocorp.com • 800.222.5556 • 262.679.9010
World Headquarters S80 W18766 Apollo Drive, Muskego, WI 53150 USA
Installation Instructions
2000/2000W/G2-2000 Handrail
Please read all instructions before installing
handrail.
SECTION VIEW
Safety Glasses, Tape Measure, 3/8” socket for machine screw hex bolt, 7/16” socket for wood screw
hex bolt Level, Power Drill, Drill Bits - 1/4” masonry (concrete/concrete block), Power Miter Saw, 1O”
Blade with 60-80 Carbide Tipped Teeth
Recommended tools
Important
1. Acclimate materials 24 hrs
before installation. Maintain
temperature controlled
environment after installation
2. Install in accordance with
manufacturer’s installation
instructions. Failure to do so
will void the warranty.
Installation tips
1. Cut covers up to 1/16” (1.6mm)
longer to ensure a tight t.
2. Lubricate blades when cutting
aluminum to reduce burrs.
IPC.335/REV.10
1 1/2"
[38mm]
2 1/4"
[57mm]
1 1/4"
[32mm]
3 3/4"
[95mm]
1/4" NUT AND
LOCK-WASHER
1/4 - 20 X 3"
HEX HEAD
SCREW W/
PHILLIPS
HEAD SLOT
STAINLESS
STEEL
MOUNTING
BRACKET
CONTINUOUS
ALUMINUM
RETAINER
.080"
[2mm]
VINYL
COVER
.080"
[2mm]
4 5/8"
[118mm]
CONVENTIONAL
STEEL STUD
(BY OTHERS)
HANDRAIL HEIGHT
PER LOCAL CODE
MOUNTING
BRACKET
1 1/2"
[38mm]
2 1/4"
[57mm]
VINYL COVER
.080"
CONTINUOUS
ALUMINUM
RETAINER
.080"
1/4 -20 x 5"
HEX HEAD
SCREW
W/PHILLIPS
HEAD SLOT
[25mm]
1 1/4"
[32mm]
3 3/4"
[95mm]
1 1/8" SLOTTED
PAN HEAD SCREW
W/SERRATED
FLANGE NUT
[2mm]
1"
[2mm]
2 13/16"
[72mm]
CONVENTIONAL
STEEL STUD
(BY OTHERS)
HANDRAIL HEIGHT
PER LOCAL CODE

Summary

Important Installation Guidance

Material Acclimation and Environment Control

Acclimate materials 24 hrs before installation and maintain a controlled environment post-installation.

Adherence to Manufacturers Instructions

Install according to manufacturer's instructions to avoid voiding the warranty.

Cutting and Preparation Tips

Tips for cutting aluminum retainer, including ensuring proper length and lubricating blades.

Components and Fasteners

Component Identification

Lists and illustrates all handrail components, including retainers, brackets, covers, and returns.

Fastener Selection by Wall Condition

Specifies correct fasteners for steel stud, wood stud, and concrete wall installations.

Layout and Assembly

Layout View and Dimensions

Provides key dimensions for handrail placement, including field dimensions and bracket spacing.

Exploded View Assembly

Shows an exploded view of all handrail components and their assembly order.

Installation Steps

Retainer Cutting and Preparation

Cut aluminum retainer to length with allowances for returns and corners.

Drilling and Bracket Attachment

Drill retainer for brackets; attach returns/corners and plastic or stainless steel brackets.

Retainer Mounting and Securing

Position retainer, mark holes, drill, attach mounting bolts, and tighten screws to secure.

Cover Installation and Securing Returns

Position cover on retainer, work to secure; secure returns to wall and reattach bottom plate.

IPC 2000 Specifications

General

Category	Industrial Equipment
Model	IPC 2000
Type	Industrial PC
Storage	SSD/HDD options available
Operating System	Windows 10 IoT/ Linux
Ports	HDMI
Mounting	Wall