RSGM Installer Guide
37
6.5 Network Configuration Descriptions
6.5.1 WAN Configuration
The WAN connection is used for the communication with the iPECS as well as other network
devices beyond the local network.
These settings allow configuration of the Ethernet WAN interface. First, select whether you wish
the WAN interface to be configured for dynamic (via a DHCP server on the network if Ethernet, or
via PPP if using PPPoE), or static IP addressing. If you wish to assign the WAN interface settings
statically, enter the IP address, subnet mask, default gateway IP address and DNS server IP
address. It is also recommended that the network domain name be provided as well, to ensure
correct DNS operation.
WAN Settings
First, select whether PPPoE is enabled or disabled. If enabled, enter the username and password
required for the login (authentication) process. If the PPPoE server (service provider) requires any
special Service Name or AC (Account) Name to be set, you can specify the tags here.
PPPoE Settings
VLAN settings allow configuration of VLAN tag and/or Priority tag for all outgoing packets.
VLAN Settings
To Next Page
