iPega Batman - How to Use USB Data Cable Connect to PC for Gaming; PC Wired Modes; Turbo Function

How
to
use
USB
data
cable
connect
to
PC
for
gaming
1.
Hold
on
the
START
key
on
gamepad
and
connect
gamepad
to
the
computer's
USB
port
via
the
USB
cable
At
this
point
entered
the
USB wired
mode.
2.
After
the
wired
mode
connected,
the
LED2
indicator is
on;
In
this
case,
it
is
the
PS3
mode.
you
can
play
games
on Sony PSs3.
3.
Press
the1key
for
three
seconds
to
switch to
x-input
mode
and
playing
of
360
games
on
PC.
The
LED3
indicator
lights
up
once successful
connected.
Bluetooth
connection to PC:
1.
With
the
gamepad
off,
press
and
hold
gamepad
button
Android
+Usimultaneously
for
searching
the
Bluetooth
device,
and the
LED1-LED4
flash
quickly.
(If
your
PC has
Bluetooth
function, please go to step2.2)
2.1
Insert
the
Bluetooth
4.0
Dongle
into
the
USB
interface
on PC
device;
The
driver
will be
installed by Windows system automatically;
2.2
After
the
driver
is
installed
successfully,
the
symbol
of
the
Bluetooth
device
will be
displayed
in
the lower right corner of the computer;
2.3
Move
the
mouse
to the
Bluetooth
symbol,
click
the
right
mouse
button,and
select
"Add
device"
2.4
After
selecting
"Add device",
the
device
model
(PG-9076)
icon
can
be
searched
2.5
Click
"next",
and
select
"Do
not
use the
code
to
match",
it will
be
automatically
added
after
confirmed,
then
remind
the
Bluetooth
was
connected!
After
connected,
the
indicator
light
is
always on;
2.6
It will
be
D_INPUT
mode
after
the
Bluetooth
is
connected
successfully
and
can
support
the
games running in simulator way.
Turbo Function:
1.
Enabling
of Turbo
Function:
First,
press
the
key
that
needs
the
turbo
function,
for
example,
the
A
key
and
then,
press
the
Turbo
key.
At
this
moment,
the
A
key
will
be
enabled with the turbo function.
2. Disabling of Turbo Function: First, press the key that
has
been
set
up
with the
turbo
function,
for
example,
the
A key and then, press the Turbo key. At this moment, the
turbo function in A key will be disabled.