143YLS-K
11.3 Disposal
Contact IPG service
Contact IPG Laser GmbH before final disposal of the
product.
The following points are to be observed when disposing of the product,
the accessories and the operating and auxiliary materials:
• Observe national provisions on site
• Observe company-specific guidelines
Following proper disassembly, the disassembled individual parts are to
be recycled:
• Scrap remaining metallic material
• Recycle plastic elements
• Dispose of other components sorted by material property
• If a water-glycol mixture was used, it must be disposed of in ac-
cordance with the local regulations. The water-glycol mixture
may not be allowed into the public sewer network.
Electronic waste, electronic components, lubricants and auxiliary sub-
stances (e.g. water-glycol mixtures) are subject to special waste treat-
ment and may only be disposed of by approved specialized personnel.
National disposal regulations must be observed with respect to the en-
vironmental disposal of the product.
| Decommissioning and disposal
To Next Page
Loading...
