19
Pairing the headset with 2 devices – Multipoint Technology
iPro RH120 headset supports Multipoint Technology that enables you to pair and
connect your headset to two different Bluetooth audio devices at once.
1. Pair the headset with the first device following the pairing steps as described in the
previous section.
2. After pairing with the first device completed, turn off the headset and Bluetooth
feature of the device.
3. Pair the headset with the second device (following the same pairing steps).
4. Re-enable the Bluetooth feature of the first device to reconnect with the handset.
Auto Pairing
1. If the headset is turned off, it will automatically be connected to your device as soon
as it is turned on again. If it is not automatically connected, choose "Connect" from
the device’s menu.
To Next Page
Loading...