iProSecu iDC-453 - Network Configuration; IP Setting; DHCP; Static IP

To Next Page

To Previous Page

24/44

B.Network

i、 IP Setting

IP Camera supports DHCP and static IP.

a. DHCP：Using DHCP, IP Camera will get all the network parameters

automatically.

b. Static IP：Please type in IP address, subnet mask, gateway, and

DNS manually.

c. Port Assignment: user may need to assign different port to avoid

conflict when setting up IP assignment.

1. Web Page Port: setup web page connecting port and video

transmitting port (Default: 80)

2. RTSP Port: setup port for RTSP transmitting (Default: 554)

3. RTP Start and End Port: in RTSP mode, you may use TCP and

UDP for connecting. TCP connection uses RTSP Port (554).

UDP connection uses RTP Start and End Port.