Why does the Over Temp Light light up on Iradion Measuring Instruments?
If the Over Temp Light illuminates on your Iradion Measuring Instruments, this means that the cooling water is too hot for proper operation. You should improve the cooling system to resolve this issue.
Why does the laser power seem low on Iradion Measuring Instruments?
Low laser power in Iradion Measuring Instruments may indicate a possible RFPA malfunction.
How to fix Iradion Infinity Measuring Instruments when the key switch is on, but the system is not ready?
If the key switch is on but the Iradion Measuring Instruments system isn't ready, try toggling the Key Switch.
What to do if the Over Temp Light lights on Iradion Measuring Instruments?
When the Over Temp Light illuminates on your Iradion Measuring Instruments, it indicates that the RFPA heat sink is too hot. To resolve this, improve the cooling. Also, check for any intake blockages that may be contributing to the overheating.
Why laser power seems low on Iradion Measuring Instruments?
If the laser power seems low on your Iradion Measuring Instruments, it could be due to several reasons. The operating temperature might be very high, the fans may have failed, the heatsink could be clogged with dust, there might be optical damage to the lens, or there could be an RFPA malfunction. Unfortunately, the suggested solutions are not mentioned.
Lists potential hazards like lifting, unauthorized access, and electrical exposure.
Lists pin assignments for the 15-pin D-sub connector.
Warns about unintended laser emission from tickle pulse settings.
Describes the function of various indicator LEDs on the laser.
General| Brand | Iradion |
|---|---|
| Model | Infinity Series |
| Category | Measuring Instruments |
| Language | English |
To Next Page
