IRIS Touch 4 NG Series - Page 15

IRIS Touch Quick Installation & Maintenance Guide Version 1.1 Page 15 of 16
Safety
Care should be taken when connecting telecommunications equipment to ensure only like interfaces are
connected to avoid safety hazards.
SELV:
SELV (Safety Extra-Low Voltage) is defined as a secondary circuit which is so designed
and protected that under normal and single fault conditions the voltage between any
two accessible parts does not exceed a safe value (42.4V peak or 60V dc maximum)
The interfaces on the IRIS Touch have the following safety classifications:
 Dial capture interface: SELV suitable for connection to the TNV interface of single line
telecommunications equipment such as telephones, alarm panels, etc.
 Power Interface: SELV for connection to a DC supply
 Inputs: SELV for connection to alarm output pin.
Conformance
European Directives
The IRIS Touch complies with the following European Directives:
 1999/5/EC (Radio & Telecoms Terminal Equipment Directive)
 2006/95/EC (Low Voltage Directive)
 2004/108/EC (Electromagnetic Compatibility Directive)
EN50131, EN50136 (VdS Certified)
The dialler is compliant with the requirements of European Standards:
EN50131-1: 2006 & EN50131-10: 2014
EN50136-1: 2012 & EN50136-2: 2013
Security Grade 4
ATS-SP6 over Ethernet, ATS-SP5 over GPRS/3G, ATS-DP4 (IRIS Touch 440NG)
When using PSTN ATS-SP2 over PSTN, ATS-DP1 (IRIS Touch 4xxNG)
Environmental Class II
EN54-21 CPR (VdS Certified)
EN54-21 CPR fire approved