10 For more information, visit global.irobot.com
EN
Note: To achieve optimal performance with
your robot and automatic dirt disposal, clean
and/or replace your robot’s filter as needed.
Install a new bag, sliding the plastic card into
the guide rails
Discard the used bag.
Press down on the lid making sure it is
completely closed.
4
3
5
Note: This will seal the bag so dust and
debris cannot escape.
Replacing the Bag
Pull up on the plastic card to remove the bag
from the canister.
Lift up on the canister lid to open.
1
2
Removing Debris from Blower
Cover
Inspect blower cover for any lint or debris build-
up and wipe with a clean dry cloth to remove.
To Next Page
Loading...
