iRobot Roomba 4210 - Roomba Maintenance; Dust Bin and Filter Maintenance; Brush and Sensor Cleaning Procedures

Roomba Maintenance
9
Roomba Maintenance
Inspect the vacuum inlet and
clean debris as needed.
6
1
2
Remove and clean the
brushes every 5 uses.
Inspect & clean sensors.
(when you clean brushes)
Periodically clean the
sensors with cotton swabs or
compressed air.
3
Empty the bin over trash barrel after each use.
Empty the filter compartment after each use.
Keep
Dispose
There are a few things you can do to keep Roomba running at peak performance.
4
5
Periodically change
Roomba’s filter.
Cliff Sensors
8