To Next Page
L
Lauren NealSep 8, 2025
How to clean iRobot Roomba 500 Vacuum Cleaner cliff sensors?
- TTracey WatkinsSep 9, 2025
If your iRobot Roomba Vacuum Cleaner's cliff sensors are dirty, wipe them off with a dry cloth.
How to clean iRobot Roomba 500 Vacuum Cleaner cliff sensors?
If your iRobot Roomba Vacuum Cleaner's cliff sensors are dirty, wipe them off with a dry cloth.
What to do if iRobot Roomba 500 Vacuum Cleaner power light will not illuminate?
If the power light on your iRobot Vacuum Cleaner won't illuminate, the battery may be extremely low. Charge the Roomba for at least 16 hours.
How to clean the cliff sensors on iRobot Roomba 500?
If Roomba’s cliff sensors are dirty, wipe them off with a dry cloth.
How to clean iRobot Vacuum Cleaner Roomba’s cliff sensors?
If Roomba’s cliff sensors are dirty, wipe them off with a dry cloth.
General| Cleaning System | 3-Stage Cleaning System |
|---|---|
| Battery Type | NiMH |
| Filter Type | AeroVac Filter |
| Scheduling | Yes |
| Bin Capacity | 0.5 liters |
| Charge Time | 3 hours |
| Dirt Detection | Yes |
| Height | 3.6 inches |
| Width | 13.4 inches |
| Virtual Wall | Yes |
| Auto Docking | Yes |
| Warranty | 1 year limited warranty |
| Navigation | iAdapt |
| Cleaning Modes | Spot |
| Battery Life | Up to 2 years |
| Weight | 3.6 kg (8 lbs) |
