Roomba
®
800 Series Owner’s Guide 7
EN
Cleaning the Front Castor Wheel
Pull firmly on the front wheel to remove it.
Remove any debris from inside the wheel cavity.
Spin the wheel by hand. If the rotation is restricted, remove the
wheel from its housing and push firmly to remove the axle and
clear any debris or hair wrapped around it.
Reinstall all parts when finished. Make sure the wheel clicks back
into place.
Use a coin or small screwdriver to remove the screw.
Remove the brush, clean the brush and the brush post, and then
reinstall the brush.
1 1
2
2
3
Important: A front wheel clogged with hair and debris
could result in floor damage.
Cleaning the Side Brush
4
Wheel
Axle
Housing
To Next Page
Loading...
