iroda SolderPRO 150K - Cleaning

14
4.SoakOriceConnectorinNaphthaorothersimilarsolventfor
approximately5minutes.
5.Replacenew(orclean)Oriceconnector(B)rememberingto
inserttheshortersideintotheTorchBody.
6.ReplaceNozzleAssemblyandhandtightenortightengentlywith
pliersgraspingtheshankoftheNozzleAssemblynottheceramic
head.
7. ReplaceTipAssembly.
• Useonlymildsoapandadampclothtocleanthehousingsof
thetool.Manyhouseholdcleanerscontainchemicalswhich
couldseriouslydamagetheplastic.Alsodonotusegasoline,
turpentine,lacquerorpaintthinner,drycleaninguidsorsimilar
products.Neverletanyliquidgetinsidethetool;neverimmerse
anypartofthetoolintoaliquid.
CLEANING
15