EasyManua.ls Logo

iroda SOLDERPRO 50K - User Manual

iroda SOLDERPRO 50K
9 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Pocket Sized Butane Soldering Iron Kit
Instruction Manual
READ INSTRUCTIONS AND WARNINGS BEFORE USE

Table of Contents

Questions and Answers

  • J
    James WalshJul 29, 2025
    What to do if my iroda SOLDERPRO 50K Power Tool does not ignite?
    • J
      johnny08Jul 29, 2025
      If your iroda Power Tool does not ignite, it could be due to several reasons. First, check if the gas tank is empty and refill it with butane fuel if needed. Second, the fuel pressure might be too high or too low; in this case, adjust the control lever to a higher or lower position. Finally, make sure you are not pushing the on/off ignition switch too fast; if you are, re-read the ignition steps.
  • A
    April ChangAug 7, 2025
    Why does my iroda Power Tool have low gas pressure or a low flame?
    • J
      Joshua BellAug 7, 2025
      If you're experiencing low gas pressure or a low flame with your iroda Power Tool, it could be due to cold fuel. Try holding the body in your hands to warm it up. Also, check if the fuel is low and refuel if necessary.
  • P
    Paul JonesAug 16, 2025
    How to fix an iroda Power Tool when the tip does not heat up?
    • A
      anthony59Aug 16, 2025
      If the tip of your iroda Power Tool isn't heating up, it could be due to a used-up catalyst. Replace it with a new tip. Another possibility is insufficient fuel pressure. Try adjusting the control lever to a higher position.

Summary

Important Safety Instructions

Description

How to Use the SOLDERPRO 50 K

Refilling

Procedure for refilling the butane gas tank with high-quality butane gas.

Ignition

Steps to ignite the soldering iron using the flint ignitor or a lighter.

Ignition Warnings

Temperature Adjustment

Changing Tips

Cleaning

Trouble Shooting

Special Warning

Specifications

iroda SOLDERPRO 50K Specifications

General IconGeneral
Power SourceButane Gas
Fuel Capacity7ml
TypeCordless Soldering Iron
Operating TimeUp to 60 minutes on a full tank
IgnitionPiezo Electric
Continuous Burn Time60 min
UsageSoldering, heat shrinking
Temperature Range250-500°C (482-932°F)

Related product manuals