iroda SOLDERPRO 50K - Ignition Warnings

SPECIFICATIONS
14
Length W/Cap 155mm(6.1inches)
W/SolderingTip 140mm(5.5inches)
Height 28mm(1.1inches)
Weight EmptyFuelTank 56g±2g
Watt 30W-70W
BTU 346.5
Approximate
Temperature
SolderingTip ≈842℉(450℃)
Torch ≈2400℉(1300℃)
HotKnife ≈842℉(450℃)
HeatBlower ≈1300℉(650℃)
Capacity GasContainer 7ml(0.24oz)
FlameLength MidSetting 1cm(0.4inches)
OperatingTime MidSetting/OneGasFilling 40min.
HeatUpTime WorkingTemperature 18seconds
Thisappliancemaybelledwithanycartridgesmarked
“Butane”complyingwithEN417.
Warning:
-Useoutdoorsonlyoruseinwellventilatedareas.
-Readtheinstructionsbeforeusingtheappliance.
CAUTION:
-Accessiblepartsmaybeveryhot.Keepyoungchildren
awayfromtheappliance.