iroda SOLDERPRO 50K - Ignition

TROUBLE SHOOTING
12 13
SPECIAL WARNING
• Thisproduct,whenusedforsolderingandsimilarapplications,
produceschemicalsknowntotheStateofCaliforniatocause
cancerandbirthdefectsorotherreproductiveharm.
• DepartmentofTransportationHazardousMaterialsRegulations
forbidthecarriageofbutaneorotherammablegasproductson
passengeraircraft.Donotpackthisitemoranyotherammable
gasitem,inanycheckedorcarry-onbaggage.
• Toreducetheriskofpersonalinjury,propertydamage,ordamage
toyourSOLDERPRO50,donotattempttorepairtheunitbody.
PROBLEM PROBABLECAUSE HOWTOCORRECT
Doesnot
ignite
a. EmptyGasTank
b.Toohighorlowfuel
pressure
c. Pushingon/oignition
switchtoofast.
a. Rellwithbutanefuel
b.Adjustcontrollevertoa
higherorlowerposition.
c. Re-readIGNITIONsteps
Lowgas
pressureor
lowame
a. Coldfuel
b.Lowfuel
a. Holdbodyinhandsto
allowunittowarmup.
b.Refuel
Tipdoesnot
heatup
a. Used-upcatalyst
b.Insucientfuel
pressure
a. Replacewithnewtip.
b.Adjustcontrollevertoa
higherposition.