iroda SOLDERPRO 50K - How to Use the SOLDERPRO 50 K; Refilling

CHANGING TIPS
10 11
CLEANING
1. Besurethetiphascooledbeforeremoval.
2. Unscrewtipwithacounterclockwise
motion.(Fig.7)Pliersmayberequiredto
lightlygraspthetipinordertoloosenit.
3.Replacewithdesiredtip.Becarefulnot
toovertightenasthiscoulddamagethe
threadinthecap.
WARNING: The catalyst inside the
soldering tip is very delicate and will
not sustain mechanical abuse without
serious damage.
• Useonlymildsoapandadampclothtocleanthehousingsofthe
tool.Manyhouseholdcleanerscontainchemicalswhichcould
seriouslydamagetheplastic.Alsodonotusegasoline,turpentine,
lacquerorpaintthinner,drycleaninguidsorsimilarproducts.
Neverletanyliquidgetinsidethetool;neverimmerseanypartof
thetoolintoaliquid.
Fig.7