11
Unique Lighting Control
As an allied brand to Irritrol in the landscaping industry, Unique Lighting oers remote control of its landscape lighting
products. The commands for its remote lighting control are included in the remote system described in this guide. The
basic control functions are furnished below.
To Switch Over to Unique Lighting Remote Control:
1. After activating the remote, press the SETUP button three times until “UL” (for Unique Lighting) appears in the
display on the left and “of” ashes on the right.
2. Press the UP arrow button to turn “on” the lighting control.
3. Press and hold the MODE/PWR button (about two seconds) until the display progresses through “o” to “LITE”.
4. Release the MODE/PWR button. “L1” for light station #1 appears along with the default remote time of 10
minutes. There are four light stations available, accessed with the UP arrow button. Adjust light station run times as
described in the zone control section of General Operation.
5. Above L4 is “LA on”. “LA” stands for Lightings All, as in all zones at once. “LA on” turns all lights zones on. “LA oF” turns
all light zones o. After selection, press ENTER .
6. To return to irrigation remote control, press and hold the MODE/PWR button (about two seconds) until the
display progresses through “o” and “CL” appears. Release the button to see the irrigation station #1.
To Next Page
Loading...
Need help?
General