Irritrol CL-R1 User Manual

CL-R1
Cancel Enter
PWR (Hold)
Setup
R-100-KIT & CL-R1
Remote Control
User’s Guide
Introduction
The Irritrol R-100-KIT Remote Control Set works with a variety
of irrigation systems, allowing the user to remotely control
compatible controllers and the watering zones. The user can
walk the landscape site, testing, troubleshooting, and/or pro-
viding supplemental watering.
The R-100-KIT Remote Set contains a remote transmitter, a
mini-receiver, and an adapter cable. The Set allows the user to
plug the mini-receiver unit into a variety of irrigation control-
lers. The CL-R1, transmitter only, works with the Irritrol CLIMATE
LOGIC® without the need for the mini-receiver.
This manual explains the installation of the R-100-KIT and cov-
ers the use and operation the remotes have in common.
• Battery Installation
• Connecting the Mini-receiver
• Transmitter Controls
• The LCD Screen
• Setting the PIN
• General Operation
• Unique Lighting Control
R-100-KIT Components
• CL-R1 Remote
Transmitter
• CL-MR Mini-receiver
• CMR-ADP Adapter
cable (not pictured)

Irritrol CL-R1 Specifications

General

Brand	Irritrol
Model	CL-R1
Category	Remote Control
Language	English

Summary

Introduction to Irritrol Remote Control

Battery Installation

Procedure for installing the 9-volt battery in the remote transmitter for power.

Connecting the Mini-receiver

Guidance on connecting the mini-receiver unit to various irrigation controllers.

Transmitter Controls Overview

Description of the buttons and functions on the remote transmitter unit.

LCD Screen Functionality

Explanation of the display screen and its readouts on the remote transmitter.

Setting the Remote PIN

Steps for setting a personal identification number (PIN) for security and operation.

General Operation Guide

Instructions covering the common use and operation of the remote control system.

Unique Lighting Control

Details on using the remote for controlling landscape lighting systems.

System Compatibility

CL-R1 and Climate Logic Compatibility

Information on the CL-R1 transmitter's compatibility with Irritrol's Climate Logic system.

Adapter Cable (CMR-ADP) Functionality

Transmitter Battery Installation

Connecting Receiver to Controller

RJ-11 Cable Connections

Instructions for connecting the mini-receiver via RJ-11 port on compatible controllers.

MC-E "Blue" Controller Connection

Procedure for connecting the receiver to early models of MC-E "Blue" controllers using an adapter.

KwikDial Controller Connection

Steps for connecting the receiver to KwikDial controllers using a 5-pin connector adapter.

Remote Transmitter Controls

Setting the Remote Transmitter PIN

Setting PIN in Climate Logic Receiver

Procedure for setting the PIN on the Climate Logic receiver module to match the transmitter.

General Operation

Automatic Power Down

Details on the transmitter's automatic power-off feature to save battery life.

Setting Maximum Stations

How to set the maximum number of stations the transmitter can control.

Starting Programs

Instructions for starting irrigation programs 'A', 'B', or 'C' via the remote.

All Stations Cycle (ASC)

Procedure for running all stations in a cycle for testing or troubleshooting.

Manual Station/Zone Operation

How to manually turn on individual stations or zones with specific run times.

Stopping All Watering

Method to immediately stop all active watering cycles using the remote.

Changing Running Stations

How to switch from one running station to another on the remote.

Unique Lighting Control Functions

FCC Regulatory Statement