Need help?Do you have a question about the Irritrol MC-24 PLUS and is the answer not in the manual?
General| Number of Zones/Stations | 24 |
|---|---|
| Power Source | AC |
| Voltage | 24 VAC |
| Display Type | LCD |
| Watering Schedules/Programs | 4 |
| Rain Delay/Sensor Compatible | Yes |
| Enclosure | Indoor/Outdoor |
| Master Valve/Pump Start/Output | Yes |
| Electrical Output | 24 VAC |
| Surge Protection | Yes |
| Cycle and Soak | Yes |
| Sensor Input | Yes |
| Enclosure Material | Plastic |
| Start Times per Program | 4 |
| Seasonal Adjust/Water Budget | Yes |
| Electrical Input | 120 VAC |
| Watering Days | 7 days |
| Type | Irrigation Controller |
| Station Run Time | 1 minute to 4 hours |
| Battery Backup | Yes, 9V battery (not included) |
Details the various buttons, dials, and display used for programming and operation.
Explains terminal strips, transformer, and bus strips for wiring valves and power.
Procedure to set the current hour and minute on the controller.
Procedure to set the current day of the week on the controller.
Guidance on creating a watering schedule based on needs.
Setting the length of time each station will water.
Defining the times when watering cycles begin.
Resolving problems with valves not turning on or staying on.
Addressing issues with programming, error messages, and blank displays.
Diagnosing cycles skipped or valves failing to operate.
Interpreting 'Fuse' errors and hardware failure codes.
To Next Page