Need help?Do you have a question about the ISA DRTS.3 PLUS and is the answer not in the manual?
General| Current Channels | 6 |
|---|---|
| Voltage Range | 0 - 300 V |
| Interfaces | USB, Ethernet |
| Application | Testing of protection relays |
| Current Range | 0 to 30 A |
| Frequency Range | 0 to 1 kHz |
| Accuracy | 0.05% |
| Power Output | 450 VA |
| Communication Interface | USB, Ethernet |
| Display | Integrated LCD |
Describes the DRTS.3 PLUS, a programmable automatic relay test set for digital protection relays in medium/high voltage networks.
Details compliance with EEC directives for Electromagnetic Compatibility, covering emission and immunity standards.
Details compliance with EEC directives for Low Voltage instruments, specifying applicable standards and parameters.
Summarizes the instrument's characteristics and performances when connected to a computer for control.
Details specifications of the three independent current sources, including output ranges, power, and resolution.
Describes the four independent voltage sources, detailing output ranges, power, and resolution.
Details digital inputs for time measurements, including debounce settings and input types.
Details the various electronic protections implemented in the instrument for safety and operational reliability.
Specifies mains power supply requirements, frequency range, and power consumption details.
Enables Ethernet substation communication for relay testing, monitoring Goose List and details.
To Next Page
