EasyManua.ls Logo

ISA DRTS.3 PLUS - Power Supply; Enclosure; Accessories; Weight and Dimensions

ISA DRTS.3 PLUS
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Doc. SIE62153 Rev. 1 Page 14/24
- Electronic protection in case of counter-feed of voltage outputs. In this instance, the ! alarm light
turns on.
- Electronic protection sensing if the test set is not properly grounded: in this instance, the operator
is warned.
- Protection against over-temperature, on all outputs.
- Diagnostic messages for the setting of wrong data, mistakes on the inputs etc.
3.15 Power supply
- Mains power supply: 90 to 132 and 180 to 264 V a.c., sinusoidal, single phase.
- Frequency: 47 to 63 Hz.
- Power consumption:
. at rest: less than 150 W;
. maximum load: 1200 W.
3.16 Enclosure
- Instrument: 3U rack.
- Case: Aluminum, with carrying handle. The instrument may be operated in the horizontal or
vertical positions.
3.17 Accessories
The following items are supplied with the DRTS.3 PLUS:
. Protection bag;
. Mains supply cable;
. Serial and USB cables;
. Relay connection cables kit: 12 in all, 4 red, 4 black, 2 blue, 2 yellow; length 2 m, cross section 1
sq. mm.
. Ground connection cable: 2 m, yellow/green, terminated with crocodile clamp.
3.18 Weight and dimensions
- Weight: 18 kg.
- Dimensions: 170 (h) x 470 (w) x 430 (d) mm.

Related product manuals