19 2020-05
TORNADO
EN 428000747237
Use and maintenance manual
12. MAINTENANCE
The Staff in charge of the appliance must control and respect the expiry dates for maintenance, given in the table below,
contacting the authorised Technical Assistance when indicated.
ATTENTION
After any maintenance it is mandatory to perform the electric safety tests in compliance with the IEC EN 50106
Standard.
FREQUENCY
ORDINARY
EXTRAORDINARY
USER
TECHNICAL ASSISTANCE
According to Use
and Requirement
Monthly
Every 6 months
Annual
Cleaning the external surfaces
Cleaning the accessible internal parts
(Without the use of tools)
Control of power supply cable/plugs and/or electrical
sockets
Check integrity of sealing gaskets
Condensing unit lter cleaning
(Where present)
Cleaning the defrosting water collection tray
Cleaning water collection tray cleaning
(Inside of tray - where present)
Condenser cleaning
Check the compressor oil level
(Where present)
Air tank draining
(Where present)
Check pneumatic connections
(Where present)
Check the integrity of chiller system piping
Inspect cables and internal power connections
Cleaning condensate drying sponges
(Where present)
Replacing of lights / LEDS
(Where present)
Replacement of control panel
(Electronic control unit - thermostat - etc.)
Replacing the power supply cable, plugs and/or electric sockets
To Next Page
Loading...
