25 2020-05
TORNADO
EN 428000747237
Use and maintenance manual
SWITCH OFF
Press the key:
or switch in position 0:
or remove the power plug:
ATTENTION
The Tornado 100 employe two different branch circuits to supply the cabinet, so it’s necessary to plug or unplug both plus.
The plugs used are NEMA 5-15 ( or NEMA 5-20).
START-UP (ON)
Activate the mains system master switch.
Plug the appliance in at the socket supplied by the customer, ensuring that the plug is tted with an earth contact and that
there are no multiple sockets connected to it.
The equipment will start working automatically with the switch
in position 1:
otherwise press the key:
NO
17.1 USER INTERFACE
To Next Page
Loading...
