TRANSLATION OF THE ORIGINAL INSTRUCTIONS
5
TORNADO
EN
2020-05428000747237
Use and maintenance manual
Liability for applying the safety instructions contained in this manual is held by the
technical personnel responsible for the intended use of the equipment, who should
ensure that authorised personnel:
• Are qualied to carry out the requested activity.
• Are aware of and carefully comply with the instructions contained in this document.
• Are aware of, and apply, the general safety standards applicable to the equipment.
The buyer is responsible for training personnel using the appliance on the risks,
safety devices and general health and safety rules required by the laws of the country
where the appliance is installed. Users/operators should be aware of the position of
all the controls and how they work, as well as of the features of the appliance. They
should also read this manual in its entirely. Maintenance work should be conducted
by qualied personnel after the appliance has been prepared adequately.
DANGER
Unauthorised tampering or replacement of one or more parts of the appli-
ance, use of accessories that modify the use of the same and use of spare
parts different to those recommended, can become the cause of injury.
DANGER
Any work conducted on the appliance must involve disconnection from the
power socket; the Tornado 100 model is supply with two different main power
cords, so it’s necessary unplugged both plugs during movement, testing or
repair of the product and in any case, none of the protective elements (grid,
casing) should be removed by non-qualied staff. The appliance should not be
operated when these protective elements have been removed. Before carry-
ing out any cleaning, maintenance or replacement operation, disconnect the
equipment from the mains by unplugging it from the electrical socket. During
these operations the operator must be able to ensure that the plug remains
disconnected.
NOTE
Particularly complex installation and maintenance tasks are not documented
in this manual to avoid compromising the functionality and safety of the de-
vice and should be carried out by manufacturer’s specialised technicians.
Never use electric devices inside this appliance. Do not use mechanical devices or
other means to accelerate the defrosting process, other than those recommended by
the manufacturer. Keep the air vents in the casing of the appliance or in the structure
built into the wall free of obstructions. Do not damage the refrigeration circuit.
The A-weighted emission sound pressure level is lower than 70 dB (A).
To Next Page
Loading...
