iScan DSF-2010-MB - User Manual

RELATED DOCUMENT – MUST COMPLY WITH SCHEDULE DOCUMENT(S):
MNL-ISCANMB
FOR A LIST OF RELEVANT PATENTS
AND TRADEMARKS PLEASE SEE
CHENTRONICS.COM/LEGAL-NOTICES
INSTALLATION & OPERATION MANUAL
PAGE 1 OF 24
ISO 9001 CERTIFIED
DRAWN BY:
AR
ON:
2022-NOV-01
LAST REV BY:
ON:
DCO No.
15137
DWG. No. MNL-ISCAN2MB
REV. J
THIS DRAWING OWNED BY CHENTRONICS. IT IS
CONDITIONALLY LOANED AND IS TO BE RETURNED UPON
REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED
NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR
TO FURNISH INFORMATION FROM IT TO OTHERS NOR TO
MAKE ANY USE OF IT THAT IS OR MAY BE INJURIOUS TO
CHENTRONICS. FOR MORE INFORMATION PLEASE CONTACT
CHENTRONICS AT +1.607.334.5531.
TOLERANCE NOTES
FABRICATED TOLERANCES
≥ 2 ft (610 mm) ± 0.250 in (6.4 mm)
< 2ft (610 mm) ± 0.125 in (3.2 mm)
MACHINED TOLERANCES
± 0.050 DECIMAL DIM (1 PLACE)
± 0.010 DECIMAL DIM (2 PLACES)
± 0.005 DECIMAL DIM (3 PLACES)
INSTALLATION & OPERATION MANUAL
DSF-2010-MB
KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE!
Read this manual before using this product. Failure to follow the instructions and safety precautions in this
manual can result in serious injury or death or damage to equipment.
Applicable Scanner Part Numbers
Contact Technical Support +1.866.821.5504 with any questions.
For a list of relevant patents and trademarks, please see http://www.chentronics.com/legal-notices
PART NUMBER
TYPE (MB, MB)
AREA (NON-HAZ, HAZ)
TEMP RATING
KEY FEATURE
INPUT
PINS
2653-271-12
MB
NON-HAZ
-30°C to 70°C
Auto-Gain
14
2653-271-06
MB
HAZ
-30°C to 70°C
Auto-Gain
10

iScan DSF-2010-MB Specifications