EasyManua.ls Logo

Iseki TG6370 - User Manual

Iseki TG6370
162 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ISEKI TRACTORS
TG6370
TG6400
TG6490
MODELS:
TG6620
TG6670
Operator’s Manual
ENGLISH

Table of Contents

Questions and Answers

  • V
    Victor MillerAug 13, 2025
    What to do if the starter motor operates but engine does not start on my Iseki Tractor?
    • L
      Laura McmahonAug 13, 2025
      If the starter motor operates but the engine doesn't start, it could be due to the electric fuel system, air in the fuel system, a clogged fuel filter, insufficient fuel supply, incorrect preheating procedure, or a defective engine. Try air-bleeding the fuel system, cleaning the fuel filter, checking the fuel level and opening the fuel valve, or using the glow plugs for a longer time.
  • W
    William GordonAug 17, 2025
    Why does my Iseki Tractor engine overheat?
    • G
      Gerald ConwayAug 17, 2025
      Your Iseki Tractor engine may be overheating due to several reasons: insufficient coolant, a broken or loose fan belt, clogged grille or radiator screens, clogged radiator fins, a defective thermostat, or insufficient engine oil. To resolve this, top up the coolant, adjust or replace the fan belt, clean the grille and radiator screens and fins, replace the thermostat, or inspect and replenish the engine oil if necessary.
  • L
    Lisa SullivanAug 20, 2025
    Why won't the starter motor operate when I turn the key to start my Iseki Tractor?
    • G
      garrett40Aug 21, 2025
      The starter motor might not operate when the key is turned to START because the gear shift lever is not in neutral, the PTO clutch is engaged, the battery is discharged, or the terminals are loose or dirty. Ensure the gear shift lever is in neutral, charge the battery, and clean and retighten the terminals securely.
  • D
    Dale BrownAug 25, 2025
    Why does my Iseki TG6370 engine stop unexpectedly during operation?
    • T
      Timothy ReedAug 25, 2025
      An Iseki Tractor engine might stop unexpectedly due to an insufficient fuel supply. Try topping up the fuel and bleeding the fuel system.
  • C
    Christina RoseAug 28, 2025
    Why is my Iseki Tractor engine running irregularly?
    • J
      Johnny WongAug 28, 2025
      Irregular engine running can be caused by air in the fuel system, a clogged fuel filter, or fuel leakage from the fuel line. Try air-bleeding the fuel system, cleaning the fuel filter, or retightening the clamps and replacing any defective pipes.
  • A
    Amy DuffyAug 31, 2025
    Why are the exhaust fumes too black on my Iseki TG6370 Tractor?
    • R
      Rebecca MackSep 1, 2025
      Black exhaust fumes could be due to poor fuel, or insufficient combustion air. Try replacing the fuel with a better grade, or checking, cleaning, or replacing the air cleaner element.
  • A
    ahollandSep 5, 2025
    Why are the exhaust fumes white on my Iseki TG6370 Tractor?
    • A
      Andrew RobinsonSep 5, 2025
      White exhaust fumes might be caused by a clogged air cleaner, high engine oil level, or a cold-running engine. Try cleaning or replacing the air cleaner element(s), inspecting and correcting the oil level, or allowing the engine to warm up and checking the thermostat.
  • P
    pamelamoralesSep 8, 2025
    What causes the starter motor to operate but not at full speed on my Iseki Tractor?
    • S
      smaloneSep 8, 2025
      If the starter motor operates but not at full speed, this could be due to a discharged battery, loose or dirty terminals, or defective oil viscosity. Try charging the battery, cleaning and retightening the terminals securely, or replacing the oil with oil of proper viscosity.

Summary

To Our Customer

Safety and Technical Information

Manual provides safety and technical information for tractor operation.

SAFETY

Machine Purpose

Defines the intended use and scope of the tractor.

Personal Safety Instructions

Provides critical safety warnings and guidelines for personal protection.

Making Your Tractor a Safe Vehicle

Offers advice on maintaining tractor safety, including road travel and visibility.

Safe Operation Practices

Covers operator qualifications, appropriate clothing, and general safe operation procedures.

Before Operation Checks

Outlines essential pre-operation inspections and safety precautions.

Starting and Operating Safely

Guides on safe engine starting and initial tractor operation.

Safe Traveling Procedures

Details safe practices for traveling on various terrains and conditions.

Loading and Unloading Safely

Provides instructions for safely loading and unloading the tractor.

During Operation Safety

Covers safety measures during tractor operation, including implements and hazards.

Inspection and Maintenance Safety

Highlights safety precautions for tractor inspection and maintenance.

Storage and Disposal Safety

Outlines safety measures for tractor storage and disposal.

SAFETY DECALS

Decal Identification and Meaning

Identifies various safety decals and explains their warnings and meanings.

Decal Maintenance and Location

Provides guidance on maintaining, replacing, and locating safety decals on the tractor.

INTRODUCTION

Purpose and Use of the Operators Manual

Explains the manual's purpose, how to use it, and the importance of dealer support.

TRACTOR IDENTIFICATION

Statutory Plate Details

Describes the information contained on the tractor's statutory identification plate.

Model Type Designation System

Explains the coding used for identifying tractor models and their features.

Locating Model and Serial Numbers

Guides on finding and recording tractor model, serial, engine, and chassis numbers.

MAJOR COMPONENTS

Rear ROPS Type Components Identification

Identifies and labels major tractor components for Rear ROPS models.

Center ROPS Type Components Identification

Identifies and labels major tractor components for Center ROPS models.

CABIN Type Components Identification

Identifies and labels major tractor components for CABIN models.

OPERATION

Standard Type Control Layout

Illustrates the layout and location of controls for the standard tractor type.

HST Type Control Layout

Illustrates the layout and location of controls for HST tractor types.

Dual Clutch Type Control Layout

Illustrates the layout and location of controls for Dual Clutch tractor types.

Instrument Panel Functions

Explains the functions of gauges, switches, and indicators on the instrument panel.

Indicator Light Array Functions

Describes the meaning and purpose of various indicator lamps.

Tachometer, Displays, and Fuel Gauge

Explains the tachometer, liquid crystal display, and fuel gauge.

Gear Shift and Speed Indications

Details the gear shift display and speed indication systems.

Fault Code Indication and Handling

Explains how fault codes are displayed and the procedure for handling them.

Horn and Lamp Switch Operations

Covers the use of horn, turn signals, and hazard warning lights.

Emergency Stop and Brake Controls

Explains the emergency stop switch and brake pedal operations.

Parking Brake Operation and Safety

Details how to apply and release the parking brake and related safety.

Tractor Starting Procedures

Provides pre-start checks and normal starting procedures for different tractor types.

Traveling Speed Selection Methods

Explains how to select traveling speeds for different transmission types.

Tractor Stopping Procedures

Details safe procedures for stopping the tractor across different types.

Differential Lock and 4-Wheel Drive Operation

Explains the function and operation of differential lock and 4WD systems.

Power Take-Off (PTO) Operation and Safety

Covers PTO shaft operation, safety precautions, and speeds.

3-Point Linkage Control System

Explains the operation of position control and draft control for the 3-point linkage.

Joystick Operation and Controls

Details the functionality and operation of the joystick control lever.

External Auxiliary Hydraulics System

Explains the operation of external auxiliary hydraulics and associated valves.

Roll Over Protective Structure (ROPS)

Describes the function, operation, and folding of ROPS.

Rear Hitch and Load Capacity

Provides specifications for the rear hitch and maximum vertical load.

Comfort Adjustments for Operator

Covers adjustments for steering column tilt and the tool box.

Seat and Suspension Adjustments

Details how to adjust the driver's seat and suspension for optimal comfort.

Front Loader and Protective Structure Fixation

Information on front loader mounting and FOPS/OPS fixation points.

Towing and Jacking Procedures

Provides instructions for safely towing and jacking the tractor.

Auxiliary Power Supply Connectors

Information on auxiliary power supply connectors and sockets.

Cabin Controls and Instruments

Overview of controls and instruments located within the tractor cabin.

Door Operation and Locking

Instructions for opening, closing, locking, and unlocking tractor doors.

Rear Window and Corner Window Operation

Details on operating the rear and corner windows.

Room Lamp and Work Lamp Operation

Instructions for operating the interior room lamp and exterior work lamps.

Wiper, Washer, and Air Conditioning Systems

Operation of wipers, washers, and the cabin's air conditioning system.

Air Vent Adjustments

Information on adjusting side and front fresh air vents for airflow direction.

Climate Control System Operation

Operating instructions for cooling, heating, and defrosting the cabin.

LUBRICATION & PERIODIC MAINTENANCE

Specifications and Capacities

Lists fluid capacities for engine, transmission, fuel, cooling, and axle systems.

Front Axle Lubrication Details

Details lubrication points and procedures for the front axle.

Grease Fitting Lubrication

Instructions for lubricating all grease fittings and recommended grease types.

Engine Oil and Filter Maintenance Procedures

Procedures for checking, changing, and replacing engine oil and filter.

Transmission Oil and Filter Maintenance

Procedures for checking, replacing, and cleaning transmission oil filters.

Cooling System Maintenance Guidelines

Guidelines for checking, replenishing, flushing, and cleaning the cooling system.

Fan Belt Tension Adjustment

Instructions for checking and adjusting the fan belt tension.

Engine Air Cleaner Servicing

Procedures for cleaning and replacing the engine air cleaner element.

Fuel System Maintenance Procedures

Covers fuel system bleeding, filter replacement, and throttle lever adjustment.

Electrical System Maintenance and Safety

Guidance on battery maintenance, wiring, and fuse arrangements.

Clutch Free-Play Adjustment Procedure

Instructions for checking and adjusting clutch pedal free-play.

Brake Adjustment Procedures

Procedures for checking and adjusting brake pedal free-play and balance.

Wheels and Tires Maintenance Checks

Information on tire inflation pressures, wheel bolt torque, and alignment.

Tractor Storage Guidelines

Guidelines for storing the tractor for extended periods.

Safe Machine Washing Procedures

Safe procedures for washing the tractor.

Major Consumables and Parts List

Lists common replaceable parts and their codes for maintenance.

TROUBLESHOOTING

Engine Problems and Solutions

Lists common engine problems, their causes, and remedies.

Clutch Problems and Solutions

Addresses common clutch issues, causes, and solutions.

Brake Problems and Solutions

Details common brake issues, their causes, and remedies.

Steering System Problems and Solutions

Covers steering problems, their causes, and recommended solutions.

Hydraulic System Problems and Solutions

Lists hydraulic system issues, potential causes, and corrective actions.

Electrical System Problems and Solutions

Troubleshooting common electrical system problems and their solutions.

HST System Problems and Solutions

Addresses issues specific to the HST system, including fault codes.

SPECIFICATIONS

Engine Specifications Overview

Provides detailed technical specifications for the tractor engines.

Cabin Specifications Details

Information regarding the tractor's cabin and air conditioning system.

Transmission Specifications Data

Details transmission types, speeds, and clutch specifications.

Power Take-Off (PTO) Specifications

Lists PTO types, controls, shaft sizes, and speeds.

Hydraulic System Specifications Data

Provides specifications for steering and main hydraulic systems, and rear linkage.

Electrical System Specifications Data

Details system voltage, battery CCA, and charging system specifications.

Fluid Capacities

Lists fluid capacities for engine, transmission, fuel, cooling, and axle systems.

Tread Width Setting Specifications

Specifies tread width settings for various tire configurations.

General Dimensions and Measurements

Provides overall dimensions, wheelbase, overhangs, and turning radii.

Axle Loads and Tire Capacity Data

Details axle load limits and tire load carrying capacities.

Noise Declaration Report

Reports sound levels for driver exposure under various conditions.

Vibration Declaration Report

Declares vibration transmission values for different seat types.

Front Weight Attachment Guidance

Guidance on attaching front weights for tractor balance.

Optional Attachments Information

Lists available optional attachments for the tractor.

INDEX

Numeric Index

Index of topics organized numerically and alphabetically.

Alphabetical Index

Index of topics organized alphabetically.

WIRING DIAGRAM

Standard Type Wiring Diagram

Electrical wiring schematic for the standard tractor type.

HST Type Wiring Diagram

Electrical wiring schematic for HST tractor types.

Dual Clutch Type Wiring Diagram

Electrical wiring schematic for Dual Clutch tractor types.

Iseki TG6370 Specifications

General IconGeneral
BrandIseki
ModelTG6370
CategoryTractor
LanguageEnglish

Related product manuals