What to do if the head lamps are dim on my Iseki TG6687 Tractor?
If the head lamps are dim, charge the battery, check the charging system, check ground points and terminals, and clean and tighten them.
What to do if my Iseki TG6687 Tractor engine overheats?
If your Iseki Tractor engine overheats, top up the coolant, adjust or replace the belt, and ensure you inspect and replenish the oil level if necessary. Cleaning is also recommended.
Why does my Iseki TG6687 engine stop unexpectedly during operation?
If your Iseki Tractor engine stops unexpectedly during operation, top up the fuel and bleed the fuel system.
What should I do if the charging monitor is lit during operation of my Iseki TG6687 Tractor?
If the charging monitor is lit during operation, correct loose or dirty terminals, short circuits, or poor connections. Replenish distilled water or replace the battery. Adjust the belt tension or replace it.
What should I do if the starter motor operates but the engine does not start in my Iseki TG6687 Tractor?
If the starter motor operates but the engine does not start, air-bleed the fuel system, clean the filter, check the fuel level and open the fuel valve. You may also need longer use of glow plugs.
Why is there too much free-play in my Iseki TG6687 steering wheel?
If the steering wheel has too much free-play, retighten the components.
What to do if my Iseki TG6687 Tractor battery cannot be charged?
If the battery cannot be charged, check the fuse and replace it, correct loose or dirty terminals, short circuits, or poor ground connections. Give the belt proper tension or replace it and correct loose terminal connections, corrosion, or electrolyte level.
What causes the clutch to not disengage on my Iseki TG6687 Tractor and how do I resolve it?
If the clutch will not disengage, adjust the free-play.
What to do if the starter motor operates but not at full speed in my Iseki TG6687?
If the starter motor operates but not at full speed, charge the battery, clean and retighten securely, clean and tighten the starter mounting, and replace with oil of proper viscosity.
Why are the exhaust fumes white on my Iseki TG6687 Tractor?
If the exhaust fumes are white, clean or replace the element(s), inspect and correct the oil level, allow the engine to warm up, and check the thermostat.
Explains safety symbols and general safety precautions.
Essential advice for safe tractor operation.
Critical checks and preparations before starting.
Step-by-step guide for starting and initial operation.
Safety precautions and procedures for tractor movement.
Safety measures to follow while operating the tractor.
Procedures for regular inspection and maintenance.
Safety precautions and procedures for handling the battery.
Identification and explanation of various safety warning labels on the tractor.
Specific warnings and instructions related to battery safety.
Cautionary labels for tractor operation.
Explanation of various warning and indicator lights on the panel.
How diagnostic fault codes are displayed and interpreted.
Procedure for manual DPF regeneration.
Function and operation of the emergency engine stop switch.
Operation and function of the clutch pedal.
Information regarding the tractor's braking system.
Operation and adjustment of brake pedals.
How to engage and disengage the parking brake.
Procedures and precautions for starting the tractor.
Essential checks before daily tractor operation.
Step-by-step instructions for starting a standard tractor.
Step-by-step instructions for starting an HST tractor.
Step-by-step instructions for starting a Dual Clutch tractor.
Specific procedures for starting the tractor in cold conditions.
How to operate the hydrostatic transmission pedal.
Functionality and operation of the cruise control system.
Step-by-step instructions for safely stopping the tractor.
Step-by-step instructions for stopping an HST tractor.
Step-by-step instructions for stopping a Dual Clutch tractor.
Function and operation of the differential lock.
How to engage and disengage the 4-wheel drive system.
Specifications and operation of the rear PTO shaft.
Specifications and operation of the mid PTO shaft.
Controls for engaging and selecting PTO operation.
How to control the 3-point linkage height.
Function of the draft control lever for implements.
Linkage control for dual clutch models.
How to adjust draft control sensitivity.
Procedures for attaching implements to the tractor.
Procedures for safely detaching implements.
Operation of the joystick for loader or attachment control.
Detailed operation of the joystick controls.
Controls and operation of the cabin air conditioning system.
Technical specifications and fluid capacities for maintenance.
General layout of lubrication and fluid fill points.
Schedule for regular inspections and maintenance tasks.
Service procedures for engine oil and filter on TG6407.
Service procedures for engine oil and filter on other models.
Service procedures for transmission oil and filters.
Lubrication and capacity details for the front axle oil.
Information on the tractor's cooling system.
Safety, handling, and charging procedures for the battery.
A comprehensive list of fault codes and their descriptions.
To Next Page
General
