What to do if my Iseki TG6687 Tractor engine overheats?
If your Iseki Tractor engine overheats, top up the coolant, adjust or replace the belt, and ensure you inspect and replenish the oil level if necessary. Cleaning is also recommended.
Explains safety symbols and general safety precautions.
Essential advice for safe tractor operation.
Critical checks and preparations before starting.
Step-by-step guide for starting and initial operation.
Safety precautions and procedures for tractor movement.
Safety measures to follow while operating the tractor.
Procedures for regular inspection and maintenance.
Safety precautions and procedures for handling the battery.
Identification and explanation of various safety warning labels on the tractor.
Specific warnings and instructions related to battery safety.
Cautionary labels for tractor operation.
Explanation of various warning and indicator lights on the panel.
How diagnostic fault codes are displayed and interpreted.
Procedure for manual DPF regeneration.
Function and operation of the emergency engine stop switch.
Operation and function of the clutch pedal.
Information regarding the tractor's braking system.
Operation and adjustment of brake pedals.
How to engage and disengage the parking brake.
Procedures and precautions for starting the tractor.
Essential checks before daily tractor operation.
Step-by-step instructions for starting a standard tractor.
Step-by-step instructions for starting an HST tractor.
Step-by-step instructions for starting a Dual Clutch tractor.
Specific procedures for starting the tractor in cold conditions.
How to operate the hydrostatic transmission pedal.
Functionality and operation of the cruise control system.
Step-by-step instructions for safely stopping the tractor.
Step-by-step instructions for stopping an HST tractor.
Step-by-step instructions for stopping a Dual Clutch tractor.
Function and operation of the differential lock.
How to engage and disengage the 4-wheel drive system.
Specifications and operation of the rear PTO shaft.
Specifications and operation of the mid PTO shaft.
Controls for engaging and selecting PTO operation.
How to control the 3-point linkage height.
Function of the draft control lever for implements.
Linkage control for dual clutch models.
How to adjust draft control sensitivity.
Procedures for attaching implements to the tractor.
Procedures for safely detaching implements.
Operation of the joystick for loader or attachment control.
Detailed operation of the joystick controls.
Controls and operation of the cabin air conditioning system.
Technical specifications and fluid capacities for maintenance.
General layout of lubrication and fluid fill points.
Schedule for regular inspections and maintenance tasks.
Service procedures for engine oil and filter on TG6407.
Service procedures for engine oil and filter on other models.
Service procedures for transmission oil and filters.
Lubrication and capacity details for the front axle oil.
Information on the tractor's cooling system.
Safety, handling, and charging procedures for the battery.
A comprehensive list of fault codes and their descriptions.
To Next Page
General
