To Next Page
T
turnermeghanSep 23, 2025
What to do if the maximum speed does not change on my Iseki TG6507 Tractor?
- HHector WestSep 23, 2025
Check the coupler or replace it.
What to do if the maximum speed does not change on my Iseki TG6507 Tractor?
Check the coupler or replace it.
What to do if my Iseki Tractor engine overheats?
If your Iseki Tractor engine overheats, top up the coolant, adjust or replace the belt, and ensure you inspect and replenish the oil level if necessary. Cleaning is also recommended.
Why does my Iseki TG6507 engine stop unexpectedly during operation?
If your Iseki Tractor engine stops unexpectedly during operation, top up the fuel and bleed the fuel system.
What should I do if the charging monitor is lit during operation of my Iseki TG6507 Tractor?
If the charging monitor is lit during operation, correct loose or dirty terminals, short circuits, or poor connections. Replenish distilled water or replace the battery. Adjust the belt tension or replace it.
What should I do if the starter motor operates but the engine does not start in my Iseki Tractor?
If the starter motor operates but the engine does not start, air-bleed the fuel system, clean the filter, check the fuel level and open the fuel valve. You may also need longer use of glow plugs.
Why is there too much free-play in my Iseki TG6507 steering wheel?
If the steering wheel has too much free-play, retighten the components.
What to do if my Iseki TG6507 battery cannot be charged?
If the battery cannot be charged, check the fuse and replace it, correct loose or dirty terminals, short circuits, or poor ground connections. Give the belt proper tension or replace it and correct loose terminal connections, corrosion, or electrolyte level.
What causes the clutch to not disengage on my Iseki TG6507 Tractor and how do I resolve it?
If the clutch will not disengage, adjust the free-play.
What to do if the starter motor operates but not at full speed in my Iseki TG6507 Tractor?
If the starter motor operates but not at full speed, charge the battery, clean and retighten securely, clean and tighten the starter mounting, and replace with oil of proper viscosity.
Why are the exhaust fumes white on my Iseki TG6507?
If the exhaust fumes are white, clean or replace the element(s), inspect and correct the oil level, allow the engine to warm up, and check the thermostat.
Explains symbols and general safety precautions.
Pre-operation checks, safety device handling, and fueling precautions.
Safety measures during normal tractor operation, including hazards and precautions.
Procedures for starting the engine and safe operation.
How to select and change traveling speeds for different models.
Information on PTO shafts, speeds, and operation.
Explains how fault codes are displayed and what they mean.
Explains symbols and general safety precautions.
Pre-operation checks, safety device handling, and fueling precautions.
Safety measures during normal tractor operation, including hazards and precautions.
Procedures for starting the engine and safe operation.
How to select and change traveling speeds for different models.
Information on PTO shafts, speeds, and operation.
Explains how fault codes are displayed and what they mean.
General| Engine Type | Diesel |
|---|---|
| Engine Power | 65 HP |
| Transmission | Hydrostatic |
| Fuel Type | Diesel |
| Drive | 4WD |
| Number of Cylinders | 4 |
| PTO Power | Approx. 55 hp |
| Fuel Tank Capacity | 60 liters |
| Engine | 4-cylinder diesel |
