To Next Page
A
Alexandra DrakeAug 31, 2025
How to fix brakes that do not work well on Iseki TG6507 Tractor?
- Sstephanie20Aug 31, 2025
To address brakes that don't work well or are not balanced, adjust the free-play and correct the pedals so they are equal.
How to fix brakes that do not work well on Iseki TG6507 Tractor?
To address brakes that don't work well or are not balanced, adjust the free-play and correct the pedals so they are equal.
What to do if my Iseki TG6507 has poor engine output?
If your Iseki Tractor has poor engine output, check the fuel system and clean or replace the elements.
How to fix irregular engine running in Iseki Tractor?
To fix irregular engine running, air-bleed the fuel system, clean the filter, and retighten clamps, replacing any defective pipes.
What should I do if the starter motor operates but the engine does not start in my Iseki Tractor?
If the starter motor operates but the engine does not start, air-bleed the fuel system, clean the filter, check the fuel level and open the fuel valve. You may also need longer use of glow plugs.
What should I do if the charging monitor is lit during operation of my Iseki TG6507 Tractor?
If the charging monitor is lit during operation, correct loose or dirty terminals, short circuits, or poor connections. Replenish distilled water or replace the battery. Adjust the belt tension or replace it.
Why does my Iseki TG6507 engine stop unexpectedly during operation?
If your Iseki Tractor engine stops unexpectedly during operation, top up the fuel and bleed the fuel system.
What to do if my Iseki Tractor engine overheats?
If your Iseki Tractor engine overheats, top up the coolant, adjust or replace the belt, and ensure you inspect and replenish the oil level if necessary. Cleaning is also recommended.
General| Engine Type | Diesel |
|---|---|
| Engine Power | 65 HP |
| Transmission | Hydrostatic |
| Fuel Type | Diesel |
| Drive | 4WD |
| Number of Cylinders | 4 |
| PTO Power | Approx. 55 hp |
| Fuel Tank Capacity | 60 liters |
| Engine | 4-cylinder diesel |
Explains symbols and general safety precautions.
Pre-operation checks, safety device handling, and fueling precautions.
Safety measures during normal tractor operation, including hazards and precautions.
Procedures for starting the engine and safe operation.
How to select and change traveling speeds for different models.
Information on PTO shafts, speeds, and operation.
Explains how fault codes are displayed and what they mean.
