What to do if Iseki TH4295 starter motor does not operate?
If the starter motor of your Iseki Tractor doesn't operate when the key is turned to START, ensure the gear shift lever is in neutral and the PTO is switched off. Charge the battery and clean and securely retighten the connections.
Defines the intended use and operational scope of the tractor.
Details symbols and warnings related to personal safety.
Guidelines for ensuring the tractor operates as a safe vehicle.
Procedures and practices for maintaining a safe working environment.
Essential practices and knowledge for safe tractor operation.
Instructions for ensuring safety when others use the tractor.
Crucial checks and preparations before starting tractor operation.
Steps and precautions for safely starting the engine and moving the tractor.
Safety guidelines and precautions for travelling with the tractor.
Procedures and safety measures for loading/unloading the tractor.
Technical specifications and requirements for using loading ramps.
Safety precautions to be observed while the tractor is in operation.
Guidance on the proper dismantling and disposal of the tractor.
Safety guidelines and procedures for inspection and maintenance tasks.
Recommendations and precautions for storing the tractor.
Procedures for maintaining the tractor's electrical system safely.
Identifies safety decals and their specific locations on the tractor.
Details of homologation and attestation numbers for the tractor.
Explanation of the tractor's model type designation system.
Information on locating and recording tractor and engine serial numbers.
Identification and terminology of the tractor's main components.
Overview of gauges, switches, and indicators on the instrument panel.
Explanation of the various warning and indicator lights on the panel.
How to read and interpret the engine coolant temperature gauge.
Information on the engine tachometer and its functions.
How to read and use the tractor's fuel gauge.
Operation of the horn and lighting control switch.
Function and usage of the hazard warning light switch.
Operation and safety features of the PTO engagement switch.
Function and operation of the clutch pedal in mechanical transmissions.
Details on brake pedal operation, including latching for transport.
How to engage and disengage the parking brake lever.
Controls for regulating engine speed, including throttle and accelerator.
Overview of transmission shift levers and their functions.
Details on the standard transmission system and its operation.
How to use the range and gear shift levers for speed selection.
Information on the synchroshuttle transmission system and its operation.
Operation of the lever for selecting forward and reverse travel.
Principles and operation of the hydrostatic transmission system.
How to use the range shift and cruise control levers for speed management.
Function and operation of the differential lock for improved traction.
How to engage and disengage the four-wheel drive system.
Control and operation of the rear power take-off selector lever.
Control and operation of the mid-mounted power take-off selector lever.
How to use the position control lever for hitch height adjustment.
Function and operation of the draft control system for ground-engaging implements.
Adjustment of the hitch and implement lowering speed.
Operation of the joystick for controlling loader or other attachments.
How to use the lockout system to prevent accidental joystick operation.
Installation and operation of auxiliary hydraulic systems for implements.
Safety guidelines and procedures related to the ROPS.
Details on the tractor's drawbar for attaching implements.
Information regarding the tractor seat and seat belt requirements.
Safe procedures for detaching implements from the tractor.
Details and specifications of the rear hitch system.
Guidelines for the initial break-in period to ensure tractor longevity.
Procedures for starting the engine and essential pre-start checks.
Step-by-step instructions for starting the tractor under normal conditions.
Procedure for restarting a tractor engine that is already warm.
Special procedures for starting the tractor in cold ambient temperatures.
Recommended warm-up procedures for cold engines and hydraulic systems.
Key points for operators to monitor during tractor operation.
Explanation of the tractor's starting circuit and safety interlocks.
How to operate the tractor's mechanical transmission system.
Methods for selecting ground speeds with the mechanical transmission.
How to use the lever to select forward or reverse travel direction.
Procedures for safely stopping the tractor and parking it.
Operation and features of the hydrostatic transmission system.
How to select ground speeds using the hydrostatic transmission.
How to set and release the cruise control feature.
Function and operation of the differential lock for improved traction.
How to engage and disengage the four-wheel drive system.
Important safety points and operation of the PTO system.
Details on the rear PTO shaft and its operating speeds.
Information on the mid PTO shaft and its operating speeds.
Details on the front hitch and bumper frame capabilities.
How to control the PTO engagement and disengagement.
Operation of hitch controls including position and draft control.
Identification of the main components of the rear hitch linkage.
Step-by-step guide for safely attaching implements to the tractor.
Practical application of position control for various implements.
How to use draft control for ground-engaging implements.
Operation of the joystick controls and its lockout feature.
Installation and operation of auxiliary hydraulic systems for implements.
Safety guidelines and procedures related to the ROPS.
Details on the tractor's drawbar for attaching implements.
Information regarding the tractor seat and seat belt requirements.
Safe procedures for removing implements from the tractor.
Details and specifications of the rear hitch system.
Technical specifications and fluid capacity details for the tractor.
Recommended engine oil types, viscosity, and change intervals.
Information on coolant type, capacity, and freezing protection.
Fuel tank capacity and recommended fuel types.
Lubricant type and capacity for the transmission and hydraulic system.
Lubricant type and capacity for the front drive axle.
Recommended grease type and lubrication interval for fittings.
Diagram showing general lubrication and fluid fill locations.
Instructions on how to open and close the tractor hood for access.
Procedures for removing and reinstalling side covers for maintenance.
Detailed steps for lubricating and servicing the engine oil and filter.
Procedures for checking, changing transmission oil and filters.
Steps for replacing the hydrostatic transmission oil filter.
How to check and change the oil in the front drive axle.
How to check and add coolant to the reserve tank and radiator.
Procedures for flushing the radiator and replacing the coolant.
Guidance on using anti-freeze for cold weather protection.
Instructions for cleaning the tractor's radiator and fins.
How to clean the air cleaner element and evacuate valve.
Maintenance procedures for the fuel system, including filter replacement.
Steps for bleeding air from the tractor's fuel system.
Adjustment of the hand throttle lever for position retention.
Information on the electrical system, battery maintenance, and charging.
Explanation of the neutral start system and safety switches.
Overview of wiring connections and fuse locations.
How to check and adjust the clutch pedal free-play.
Procedures for adjusting the tractor's brakes and parking brake.
Guidelines for inspecting tires, inflation, and wheel bolts.
How to check and adjust front wheel alignment (toe-in).
Information on front wheel spacing settings for different tires.
Instructions for reversing rear wheel assemblies.
How to check for and correct excessive steering wheel free-play.
Checking and adjusting front axle end-float.
Checking the clutch housing plug for oil leaks.
Specifications for tightening various fasteners to the correct torque.
Recommended procedures for storing the tractor during off-season.
Precautions and guidelines for washing the tractor, especially with high pressure.
Common engine problems, their possible causes, and remedies.
Troubleshooting common clutch issues like slipping or not disengaging.
Solutions for brake problems such as poor performance or sticking.
Troubleshooting common issues within the tractor's hydraulic system.
Diagnosing and fixing problems related to the steering system.
Addressing common electrical system faults and issues.
Troubleshooting problems specific to the hydrostatic transmission.
Technical specifications for the tractor's engine models.
Specifications for the standard transmission type (F9, R3).
Specifications for the shuttle type transmission (F8, R8).
Specifications for the hydrostatic (HST) transmission type.
Technical details of the standard hydraulic system.
Specifications related to the tractor's electrical system.
Details on fluid capacities for various tractor systems.
Information on adjusting tread width for different tire configurations.
Data on axle loads and maximum tyre load capacities.
Declared noise levels of the tractor according to regulatory standards.
Declared vibration levels of the tractor according to regulatory standards.
Instructions for assembling the tractor from its shipping configuration.
Checklist and procedures for pre-delivery inspection and setup.
To Next Page
General
