Iseki TM3217 User Manual

TM3217
TM3247
TM3267
MODELS:
ISEKI TRACTORS
Operator’s Manual
ENGLISH

Iseki TM3217 Specifications

General

Engine Type	Diesel
Drive Type	4WD
Hydraulic System	Open Center
Number of Gears	2 reverse
PTO Speed	540 rpm
Horsepower	32 hp

Summary

To Our Customer

Safety Instructions

Essential items for safe tractor operation.

Technical Instructions

Items for proper operation, adjustment, and service.

Before Operation

Read manual thoroughly before first operation.

Personal Protective Equipment

Emphasizes wearing PPE during operation.

SAFETY

Machine Purpose

Defines the intended use of the machine.

Personal Safety Instructions

Explains safety symbols and words like DANGER, WARNING, CAUTION.

Making Your Tractor a Safe Vehicle

How to Maintain Safety

Lists forbidden modifications and road operation rules.

For Safe Operation

How to be a Safe Operator

Emphasizes familiarization with controls and wearing PPE.

When Another Person Operates Your Machine

Instructing others on proper operation.

Before Operation

Operation Plan

Setting up an operation plan with sufficient time.

Inspection and Service

Importance of periodic inspection and service.

Safety Devices

Reinstalling safety devices after servicing.

Refueling Safety

Precautions during refueling.

Starting Engine and Operating Tractor

Indoor Operation Safety

Ventilation for indoor engine starting due to carbon monoxide.

Pre-Start Checks

Checking transmission, nearby persons, and implement security.

When Traveling

Overturning Hazards

Situations that can lead to tractor overturn.

When Traveling

Hill Travel Precautions

Driving carefully on hills, speed selection, and braking.

Rough Terrain Operation

Driving at low speeds on poor footing.

Passenger Safety

Allowing only authorized persons on the machine.

Parking Safety

Securing the tractor when parked.

Loading onto or Unloading from a Truck

Ramp Specifications

Requirements for ramp length, width, capacity, and surface.

During Operation

Operator and Bystander Safety

Keeping others away, using horn for warnings.

Touching Dangerous Parts

Avoiding contact with rotating, hot, or live parts.

Overhead Power Lines

Maintaining clearance from overhead power lines.

Inspection and Maintenance

Servicing Procedures

Engine stop, parking brake, neutral gears, key removal.

High-Pressure Fluids

Avoiding high-pressure fluids and using caution.

Inspection and Maintenance

Wheel and Tire Servicing

Supporting tractor on blocks, proper tire service.

Storage

Storage Preparation Measures

Steps for preparing the tractor for extended storage.

Battery Storage

Storing the battery during cold weather.

Maintenance of the Electrical System

To Handle the Battery

Safety precautions when working around the battery.

Safety Decals

Fan Warning Label

Warning for risk of entanglement with fan.

Battery Disconnecting Label

Warning for risk of electric shock when disconnecting battery.

Hot Part Warning Label

Warning for hot surfaces and risk of burns.

Safety Decals

Battery Label

Various warnings related to battery handling and risks.

Starter Warning Label

Danger of electric shock when starting.

Operation Caution Label

Before operation, maintenance, abrupt moving, and injury risks.

Safety Decals

Risk of Overturning

Warning against operating on slopes over 10 degrees.

Fuel Label

Danger of explosion and burns from fuel.

Safety Decals

Decal Care and Replacement

Instructions for keeping decals clean and replacing torn ones.

Location of Safety Decals

Decal Placement Diagram

Diagram showing the location of various safety decals on the tractor.

INTRODUCTION

Manual Purpose and Scope

Describes the manual's purpose for operation and maintenance.

Dealer Assistance

Advises consulting the dealer for service and adjustments.

Read Manual Before Operation

Importance of reading the entire manual before operating.

TRACTOR IDENTIFICATION

Statutory Plate

Information found on the statutory identification plate.

Model Type Designation

Decoding the model type designation system.

MODEL / SERIAL NUMBER

Tractor Identification Plate

Location and details of the tractor identification plate.

Engine Model and Serial Number

Finding engine model and serial numbers.

MAJOR COMPONENTS

Component Identification

Diagram and list identifying major tractor components.

INSTRUMENTS & CONTROLS

Mechanical Transmission Controls

Layout and location of controls for mechanical transmission.

Hydrostatic Transmission Controls

Layout and location of controls for hydrostatic transmission.

INSTRUMENT PANEL AND SWITCHES

Instrument Panel Overview

Details of gauges, switches, and indicators on the instrument panel.

Main Switch Operation

Explanation of the main switch's four positions.

Indicator Light Strip

Warning Light Functions

Explanation of various indicator lights and their meanings.

Tachometer

Tachometer Functions

Reading engine speed and PTO speed, hourmeter.

Horn / Light Turn Switch

Horn and Light Controls

Operation of horn, light switch, and passing switch.

Hazard Light Switch

Hazard Light Operation

Using hazard lights on public roadways.

Power Take-Off (PTO) Switch

PTO Engagement and Modulation

Engaging PTO, soft start vs. standard start.

MAIN CLUTCH PEDAL (MECHANICAL TRANSMISSION)

Clutch Pedal Function

Disengaging engine, starting, shifting, and stopping.

BRAKES

Brake Pedals Operation

Individual wheel brakes and interlocking plate.

Parking Brake Operation

Engaging and disengaging the parking brake.

ENGINE SPEED CONTROLS

Throttle Lever Function

Controlling engine speed with the hand lever.

Accelerator Pedal Function

Overriding throttle lever for increased speed.

TRANSMISSION SHIFT LEVERS

Gear Shift Lever Operation

Using range and main gear shift levers.

Forward / Reverse Shuttle Lever

Selecting forward or reverse travel.

DIFFERENTIAL LOCK PEDAL

Differential Lock Engagement

Engaging differential lock for traction.

Differential Lock Precautions

Warnings against engaging on hard surfaces or during turns.

4-WHEEL DRIVE SHIFT LEVER

4WD Engagement

Engaging and disengaging the front axle drive.

REAR PTO SELECTOR LEVER

Rear PTO Engagement

Controlling the rear PTO shaft.

MID PTO SELECTOR LEVER

Mid PTO Engagement

Controlling the mid PTO shaft.

Position Control

Hitch Position Adjustment

Maintaining implement height and using stoppers.

Lowering Rate Control Knob

Implement Lowering Speed

Adjusting the rate of 3-point hitch drop.

SEAT & SUSPENSION ADJUSTMENT

Driver's Weight Adjustment

Adjusting seat suspension based on driver's weight.

Height Adjustment

Adjusting the seat height.

Fore-Aft Adjustment

Adjusting the seat's forward and backward position.

SEAT & SUSPENSION ADJUSTMENT

Grammer Seat Adjustment

Specific adjustments for Grammer MSG83 / 521 seats.

OPERATION

Break-In Period Guidelines

Procedures for the first 50 hours of operation.

Pre-Start Inspection Procedures

Essential checks before starting the tractor.

Normal Starting

Starting Procedure

Step-by-step guide for starting the tractor.

Starting Engine Operations

Cold Weather Starting

Procedures for starting in cold temperatures.

Warm-Up Period Guidelines

Recommended warm-up times based on ambient temperature.

GROUND SPEED SELECTION

Mechanical Transmission Speed Selection

Using gear shift levers for ground speed.

Forward/Reverse Selection Caution

Caution regarding changing direction while moving.

OPERATION

Mechanical Transmission Speed Chart

Table of ground speeds for different gears and ranges.

Hydrostatic Transmission

Hydrostatic Drive Control

Using pedals and range shift lever for speed control.

STOPPING TRACTOR

Mechanical Transmission Stopping

Procedures for stopping a mechanical transmission tractor.

Hydrostatic Transmission Stopping Procedure

CRUISE CONTROL (HYDROSTATIC TRANSMISSION)

Setting Cruise Control

How to set and adjust cruise control.

DIFFERENTIAL LOCK OPERATION

Differential Lock Usage

How to engage and disengage differential lock.

4-WHEEL DRIVE

4WD Engagement and Disengagement

Operating the 4-wheel drive shift lever.

POWER TAKE-OFF (PTO)

PTO Safety Guidelines

General safety rules for PTO operation.

Rear PTO Shaft

Rear PTO Operating Speeds

Specifications for rear PTO shaft speeds.

Mid PTO Shaft (M Type)

Mid PTO Operating Speeds

Specifications for mid PTO shaft speeds.

PTO OPERATING CONTROLS

Mechanical Transmission PTO Controls

Operating rear and mid PTO with mechanical transmission.

PTO OPERATING CONTROLS

PTO Clutch Engagement Modes

Selectable PTO clutch modes.

3-POINT HITCH

Hitch Controls Overview

Description of hitch control quadrant and position control.

Implement Lowering Speed

Adjusting the rate of 3-point hitch drop.

Rear Linkage

Lift Rods and Linkage Components

Connecting hydraulic lift arms and linkage parts.

Rear Linkage

Top Link Attachment

Adjusting and securing the top link.

Attaching Implements

Hitch Positioning for Attachment

Aligning hitch and implement for attachment.

Using Position Control

Position Control Lever Operation

Using position control lever and stoppers.

Detaching Implements

Implement Detachment Procedure

Steps for safely detaching implements.

External Auxiliary Hydraulics

Remote Coupler Operation

Operating remote couplers for hydraulics.

7 PINS SOCKET

Trailer Socket Functions

Explanation of the 7-pin trailer socket functions.

ROLL OVER PROTECTIVE STRUCTURE (ROPS)

Rear ROPS Type Operation

Folding and unfolding the rear ROPS.

Center ROPS Type Operation

Folding and unfolding the center ROPS.

ROLL OVER PROTECTIVE STRUCTURE (ROPS)

ROPS Folding Mechanism

Pin and lock mechanism for folding ROPS.

REAR HITCH

Rear Hitch Attachment

Attaching implements to the rear hitch.

FRONT LOADER FIXATION POINT

Front Loader Mounting

Consulting dealer for front loader fixation points.

TOWING

Tractor Towing Procedure

Procedure for towing the tractor.

JACKING

Tractor Jacking Procedure

Safe procedure for jacking the tractor.

LUBRICATION & PERIODIC MAINTENANCE

Specifications and Capacities - Engine Oil

Engine oil types, viscosity, and capacities.

Engine Coolant Specifications

Coolant type, system capacity, and freezing protection.

LUBRICATION & PERIODIC MAINTENANCE

Transmission & Differential Housing Specs

Oil capacity, lubricant, and change intervals.

Front Axle Specifications

Oil capacity, lubricant, and change intervals.

LUBRICATION / FILL POINTS

Mechanical Transmission Lubrication Layout

Diagram of lubrication points for mechanical transmission.

LUBRICATION / FILL POINTS

Hydrostatic Transmission Lubrication Layout

Diagram of lubrication points for hydrostatic transmission.

Periodic Inspection and Maintenance Table

Engine Maintenance Schedule

Inspection and maintenance schedule for the engine.

Periodic Inspection and Maintenance Table

Tractor Maintenance Schedule (Continued)

Continued inspection and maintenance schedule for the tractor.

SERVICE ACCESS

Engine Hood Access

Procedures for opening and securing the engine hood.

Engine Oil & Filter

Checking Engine Oil Level

Procedure for checking engine oil level.

Changing Engine Oil

Procedure for draining and refilling engine oil.

Transmission Oil & Filters

Checking Transmission Oil Level

Procedure for checking transmission oil level.

Transmission Oil & Filters

Replacing Transmission Oil

Procedure for draining and refilling transmission oil.

Replacing Transmission Oil Filter (Sub)

Procedure for replacing the hydrostatic transmission oil filter.

Front Axle Oil

Checking Front Axle Oil Level

Procedure for checking front axle oil level.

COOLING SYSTEM

Radiator Cap Caution

Warning about removing hot radiator caps.

Cooling System Fluid Level

Maintaining coolant level in the reserve tank.

ENGINE AIR CLEANER

Servicing the Main Filter

Procedure for removing and servicing the air cleaner element.

FUEL SYSTEM

Fuel Filter Location and Check

Checking and cleaning the fuel filter assembly.

FUEL SYSTEM

Air-bleeding Procedure

Procedure for bleeding air from the fuel system.

ELECTRICAL SYSTEM

Battery Location and Cleaning

Battery location and general maintenance.

Battery Gas Hazard Warning

Warning about explosive hydrogen gas from batteries.

ELECTRICAL SYSTEM

Battery Charging Precautions

Guidelines for charging tractor batteries.

Battery Replacement Procedure

Steps for replacing the tractor battery.

Starting Switches

Neutral Start System Requirements

Conditions required to start the tractor.

Wiring / Fuse Arrangement

Wiring Connection Precautions

Keeping wiring connections clean and tight.

Wiring / Fuse Arrangement

Main Fuse Box Layout

Location and functions of the main fuse box.

CLUTCH FREE-PLAY ADJUSTMENT

Checking Clutch Free-Play

Procedure for checking and adjusting clutch pedal free-play.

BRAKE FREE-PLAY ADJUSTMENT

Checking Brake Pedal Free-Play

Procedure for checking and adjusting brake pedal free-play.

BRAKE FREE-PLAY ADJUSTMENT

Parking Brake Adjustment

Adjusting the parking lever and cable.

WHEELS & TIRES

Tire Inspection and Maintenance

Checking tire pressure, bolts, and damage.

Wheel Bolt Torque

Correct torque for wheel bolts.

Rear Wheel Spacing

Reversing Wheel Assemblies

Procedure for reversing rear wheel assemblies.

Steering Free-Play

Checking Steering System Looseness

Identifying causes of excessive steering free-play.

Front Axle End-Float

Measuring and Adjusting End-Float

Procedure for adjusting front axle end-float.

TORQUE CHART

Fastener Tightening Torques

Table of torque values for various fasteners.

STORAGE

Storage Preparation Measures

Steps for preparing the tractor for extended storage.

Post-Storage Maintenance

Maintenance after removing the tractor from storage.

WASHING OF THE MACHINE

Washing Precautions

General caution for washing the machine.

MAJOR CONSUMABLES LIST

Consumables Identification

Diagram showing location of major consumables.

MAJOR CONSUMABLES LIST

Parts and Code Numbers

Table listing parts, models, and their corresponding codes.

TROUBLESHOOTING

Engine Starting Problems

Troubleshooting issues with engine starting.

Engine Running Problems

Troubleshooting issues with irregular engine running.

TROUBLESHOOTING

Engine Performance and Oil Issues

Troubleshooting poor engine output and oil pressure.

Charging System Issues

Troubleshooting charging system indicators.

TROUBLESHOOTING

Clutch Problems

Troubleshooting clutch slipping and disengagement issues.

Brake Performance Issues

Troubleshooting brake performance and balance.

Hydraulic System Problems

Troubleshooting hydraulic oil pressure and leaks.

TROUBLESHOOTING

Steering System Problems

Troubleshooting steering wheel issues.

Electrical System Problems

Troubleshooting battery charging and lamp issues.

SPECIFICATIONS

Mechanical Transmission Engine Specs

Engine details for mechanical transmission models.

SPECIFICATIONS

Hydraulics System Specifications

Steering and main hydraulic system specs.

Electrical System Specifications

System voltage, battery, and charging specs.

Tread Width Settings

Front and rear tire tread width settings.

SPECIFICATIONS

Hydrostatic Transmission Engine Specs

Engine details for hydrostatic transmission models.

SPECIFICATIONS

Hydraulics System Specifications (Hydrostatic)

Hydraulic system specs for hydrostatic models.

DIMENSIONS

Rear ROPS Type Dimensions

Table of dimensions for rear ROPS type tractors.

DIMENSIONS

Center ROPS Type Dimensions

Table of dimensions for center ROPS type tractors.

DIMENSIONAL LIMITS OF IMPLEMENTS

Implement Size and Weight Limits

Maximum dimensions and weights for various implements.

NOISE DECLARATION

Driver Perceived Sound Level

Sound levels based on cab and ROPS configuration.

VIBRATION DECLARATION

Vibration Transmission Data

Vibration acceleration data for different seat types.

ATTACHMENT (OPTION)

Available Tractor Attachments

List of optional attachments for the tractor.