TM3217, 3247, 3267
8
Before Operation
(1) Set up an operation plan with sufficient time
allowance. A tight plan may result in unexpected
accidents when work has to be rushed.
(2) Inspect and service the machine periodically
in accordance with the instructions given in the
operator’s manual to maintain the machine in the
best condition.
Pay special attention to the controls, especially to
the brakes and clutch, and safety measures for the
machine when servicing it. If the machine functions
properly and performs normally, the chance of an
accident will be reduced greatly.
If safety devices are damaged or do not work, please
consult your dealer.
(3) Before removing a safety devices, such as a safety
cover, be sure that the machine has stopped
completely. Never forget to replace the removed
part after servicing.
(4) Never refill fuel while the engine is running or it
is still hot. Keep away from open fires and never
smoke around a fuel tank or while fueling into the
machine. Never use open flames for illumination
when fueling the machine at night.
FIG. 6
FIG. 7
FIG. 8
To Next Page
Loading...
Need help?
General
