TM3217, 3247, 3267
24
MODEL / SERIAL NUMBER
Each tractor is identified by means of tractor model and
serial numbers. As a further identification, engine and
chassis are provided with identification numbers.
To ensure prompt, efficient service when ordering parts
or requesting repairs from authorized dealer, record
these numbers in spaces provided.
TRACTOR MODEL / TYPE
TRACTOR SERIAL NUMBER
FIGS. 29 & 30: Tractor identification plate (1) located
below operator’s seat on right-hand side of fender.
Contains model / type names, production year and
month in addition to tractor serial number.
ENGINE MODEL NUMBER
ENGINE SERIAL NUMBER
FIG. 31: Engine model number (1) is cast on right side
of engine block, below the injection pump.
Engine serial number (2) is stamped on cylinder block,
below engine model number.
CHASSIS NUMBER
FIG. 32: Chassis number (1) is stamped on right side of
front frame.
NOTE: Reference to left-hand and right-hand, used
throughout this operator’s manual, refers to the
position when seated in operator’s seat and
facing forward.
FIG. 29
FIG. 30
FIG. 31
FIG. 32
To Next Page
Loading...
Need help?
General
