Iseki TM3185F3 User Manual (English)

Questions and Answers:

L
Lucas KellyAug 5, 2025
What to do if the starter motor operates but the engine does not start on my Iseki Tractor?
- S
  Scott ReedAug 5, 2025
  If the starter motor on your Iseki Tractor operates but the engine doesn't start, there are several potential causes. First, ensure that fuel is being supplied by checking the fuel level and opening the fuel valve. There might be air in the fuel system, so air-bleed the fuel system. The fuel filter could be clogged, so clean the filter. Also, consider that the preheating procedure might be incorrect, so increase the use of glow plugs. If these steps don't resolve the issue, the electric fuel control might not be operating, or the engine could be defective, and you should consult your dealer.
C
Christina LawsonAug 10, 2025
Why is my Iseki Tractor engine running irregularly?
- A
  Aimee MillerAug 10, 2025
  If your Iseki Tractor's engine is running irregularly, it might be due to air in the fuel system, so air-bleed the fuel system. Another possibility is a clogged fuel filter, so clean the filter. The fuel line could be leaking air, so retighten the clamps and replace any defective pipes. If these steps don't solve the problem, the fuel injectors could be clogged, the fuel injection pump timing might be off, or the engine itself could be defective, and you should consult your dealer.
K
Keith CooperAug 15, 2025
Why is my Iseki Tractor engine over-speeding?
- A
  Andres LangAug 15, 2025
  If your Iseki Tractor engine over-speeds, it could be due to a defective governor, an incorrect high speed setting, or engine oil getting into the combustion chambers, and you should consult your dealer.
D
davidsmithAug 19, 2025
What to do if the starter motor does not operate on my Iseki Tractor?
- B
  bgonzalezAug 19, 2025
  If the starter motor on your Iseki Tractor doesn't operate when you turn the key to START, several issues could be at play. First, make sure the gearshift lever is in neutral and the rear PTO lever is also in neutral. Check the battery; it might be discharged, so try charging it. Also, ensure the terminals are clean and securely tightened. If these steps don't resolve the issue, the safety switch or main switch might be broken, or the starter itself could be defective, and you should consult your dealer.
J
jason59Aug 25, 2025
Why is the starter motor operating but not at full speed on my Iseki TM3185F3?
- S
  Shirley WilcoxAug 26, 2025
  If the starter motor on your Iseki Tractor operates but not at full speed, it could be due to a discharged battery, so try charging it. Also, check for loose or dirty terminals and clean and retighten them securely. A defective ground could also be the cause; clean and tighten the starter mounting. Another potential cause is improper oil viscosity; replace it with oil of the proper viscosity. If none of these solutions work, the engine itself might be defective, and you should consult your dealer.
A
Andrew RyanAug 30, 2025
What to do if the Iseki Tractor engine stops when decelerated?
- D
  Donna RiceAug 30, 2025
  If your Iseki Tractor engine stops when decelerated, it may be due to an incorrect low idle setting, a malfunctioning fuel injection pump, improper valve clearance or defective fuel injectors, and you should consult your dealer.

Iseki TM3185F3 Specifications

General

Brand	Iseki
Model	TM3185F3
Category	Tractor
Language	English

Summary

SAFETY

Machine Purpose

Defines the intended agricultural, park, and winter service use of the tractor.

Personal Safety Instructions

Guidance on understanding safety symbols and warnings like DANGER, WARNING, CAUTION.

Making Your Tractor a Safe Vehicle

Advice on safe operation, including modifications, road travel, and visibility.

How to Maintain Safety

Specific tips for ensuring tractor safety during operation.

For Safe Operation

Essential knowledge and practices for operating the tractor safely.

How to be a Safe Operator

Essential knowledge for safe tractor operation.

When Another Person Operates Your Machine

Instructions for instructing other operators on safe tractor operation.

Before Operation

Pre-operation checks and procedures.

Starting Engine and Operating Tractor

Procedures for starting the engine and initial operation.

When Traveling

Safety precautions for moving the tractor.

Loading onto or Unloading from a Truck

Safe procedures for loading and unloading the tractor.

During Operation

Safety guidelines during tractor use.

Inspection and Maintenance

Procedures for inspecting and maintaining the tractor.

Storage

Guidelines for storing the tractor.

Dismantling and Disposal

Procedures for dismantling and disposing of the tractor.

Maintenance of the Electric System

Procedures for maintaining the tractor's electrical system.

To Maintain Electric Wiring

How to maintain the tractor's electrical wiring.

To Handle the Battery

Safe procedures for handling the tractor battery.

To Handle Booster Cables

Safe procedures for using booster cables.

Safety Decals

Information on safety decals.

Maintenance of Safety Decals

How to maintain and care for safety decals.

Location of Safety Decals

Diagram showing the location of safety decals.

INTRODUCTION

TRACTOR IDENTIFICATION

Statutory Plate

Information about the tractor's statutory identification plate.

Model / Serial Number

How to identify the tractor's model and serial numbers.

Model Type Designation

Explanation of the tractor's model type designation system.

MAJOR COMPONENTS

OPERATION

Instrument Panel

Overview of the tractor's instrument panel and components.

Main Switch

Description and operation of the main switch.

Indicator Light Array

Explanation of the various indicator lights on the panel.

Tachometer & Engine Hourmeter

Function of the tachometer and engine hourmeter.

Coolant Temperature Gauge

How to read and interpret the coolant temperature gauge.

Fuel Gauge

How to read and interpret the fuel gauge.

Switches

Description and operation of various switches.

Clutch Pedal

Description and function of the clutch pedal.

Brake

Information on the tractor's braking system.

Brake Pedals

Details on the tractor's brake pedals.

Parking Brake Lever

Operation and function of the parking brake lever.

Break-in Period

Important procedures for the tractor's initial operating period.

Starting

Procedures for starting the tractor.

Pre-Start Inspection

Essential checks before starting the tractor.

Normal Starting

Step-by-step procedure for normal engine starting.

Restarting Warm Engine

Procedures for starting a warm engine.

Cold Weather Starting

Special procedures for starting in cold weather.

Warm-Up Period

Recommended warm-up times for the engine and components.

Operator Observations

Key points to monitor during tractor operation.

Starting Circuit Operation

Explanation of the tractor's safety starting system.

Engine Speed Controls

How to control engine speed using levers and pedals.

Ground Speed Selection

How to select forward and reverse gears for ground speed.

Stopping Tractor

Procedures for safely stopping the tractor.

Differential Lock Operation

How to engage and disengage the differential lock.

4-Wheel Drive

How to engage and disengage the 4WD system.

Power Take-Off (PTO)

Information on the PTO system.

Rear PTO Shaft

Information about the rear PTO shaft and its specifications.

PTO Operating Controls

How to engage and operate the rear PTO.

3-Point Hitch

Information on the 3-point hitch system.

Hitch Controls

How to use the 3-point hitch position and rate control levers.

Rear Linkage

Components and adjustments of the tractor's rear linkage system.

Attaching Implements

Step-by-step guide for attaching implements to the tractor.

Using Position Control

Using position control for implement height and attachment.

Detaching Implements

Procedures for safely detaching implements from the tractor.

External Auxiliary Hydraulics (Option)

Information on optional external hydraulic systems.

Rear Hitch

Information about the tractor's rear hitch.

Roll Over Protective Structure (ROPS)

Information about the ROPS system.

How to Tilt ROPS

Instructions on how to fold down the ROPS for limited use.

Seat & Suspension Adjustment

How to adjust the operator's seat and suspension.

7 Pins Socket

Location and purpose of the 7-pin socket.

Beacon

Information about the tractor's beacon system.

Towing

Procedures and precautions for towing the tractor.

Front Loader Fixation Point

Information on front loader mounting points.

Falling Objects Protective Structure (FOPS) & Operators Protection Structure (OPS) Fixation Point

Information on FOPS/OPS fixation points.

Jacking

Procedures for safely jacking up the tractor.

LUBRICATION & PERIODIC MAINTENANCE

Specifications & Capacities

Key specifications and fluid capacities for the tractor.

Lubrication / Fill Points

Diagram showing lubrication and fill points on the tractor.

Periodic Maintenance Schedule

Schedule for routine maintenance based on operating hours.

Service Access

How to access tractor components for service.

Opening / Closing Engine Hood

How to open and close the tractor's engine hood.

Lubrication Details

Detailed lubrication procedures for various parts.

Grease Fittings

Lubrication procedures for all grease fittings.

Engine Oil & Filter

Procedures for checking, changing engine oil, and replacing the filter.

Transmission Oil & Filters

Procedures for checking and replacing transmission oil and filters.

Front Axle Oil

Procedures for checking and changing front axle oil.

Cooling System

Information on the tractor's cooling system.

Checking / Replenishing Coolant

How to check and refill the engine coolant.

Use of Anti-Freeze

Guidance on using anti-freeze for cold weather protection.

Cleaning Radiator

Procedures for cleaning the tractor's radiator.

Fan Belt

Importance of fan belt tension and adjustment procedures.

Engine Air Cleaner

Information on the engine air cleaner system.

Cleaning / Replacing Air Cleaner Element

How to clean or replace the engine air cleaner element.

Fuel System

Information on the tractor's fuel system.

Fuel Filter

Location and maintenance of the fuel filter.

Air-bleeding Procedure

How to bleed air from the fuel system.

Fuel Tank Filler Cap

Information on the fuel tank filler cap.

Throttle Lever

How to adjust and use the throttle lever.

Electrical System

Information on the tractor's electrical system.

Battery

Information on battery maintenance, handling, and safety.

Starting Switches

Information on the tractor's starting switch system.

Wiring / Fuse Arrangement

Diagram and explanation of wiring and fuse layout.

Clutch Free-Play Adjustment

Procedures for adjusting clutch pedal free-play.

Brake Free-Play Adjustment

Procedures for adjusting brake pedal free-play.

Wheels & Tires

Information on wheels and tires.

Tire Inflation Pressures

Recommended tire inflation pressures for different tire types.

Wheel Bolt Torque

Correct torque values for wheel bolts.

Front Wheel Spacing

Information on adjusting front wheel spacing.

Rear Wheel Spacing

Information on adjusting rear wheel spacing.

Steering Free-Play

How to check and adjust steering free-play.

Front Wheel Alignment

How to adjust the front wheel alignment (toe-in).

Tie Rod

Maintenance of the tie rod ends.

Clutch Housing Plug

Information on the clutch housing plug.

Torque Chart

Table of torque values for various fasteners.

Storage

Guidelines for storing the tractor for extended periods.

Washing of the Machine

Procedures for cleaning the tractor.

Major Consumables List

List of major consumable parts for the tractor.

TROUBLESHOOTING

Engine

Common engine problems and their solutions.

Clutch

Common clutch problems and their solutions.

Brake

Common brake problems and their solutions.

Hydraulic System

Common hydraulic system problems and solutions.

Steering System

Common steering system problems and solutions.

Electrical System

Common electrical system problems and solutions.

SPECIFICATIONS

Engine

Detailed specifications for the tractor's engine.

Transmission

Detailed specifications for the tractor's transmission.

Power Take Off (PTO)

Detailed specifications for the PTO system.

Hydraulic System

Detailed specifications for the tractor's hydraulic system.

Electrical System

Detailed specifications for the tractor's electrical system.

Capacities

Fluid capacities for various tractor systems.

Tread Width Settings

Information on adjustable tread width settings.

Maximum Axle Loading

Maximum allowable load for front and rear axles.

General Dimensions

Overall dimensions of the tractor.

Dimensional Limits of Implements

Maximum dimensions and weights for compatible implements.

Axle Loads & Tire Load Carrying Capacity

Load limits for axles and tires.

Front Weight

Information and specifications for front weights.

Noise Declaration

Declared noise levels of the tractor.

Vibration Declaration

Declared vibration levels of the tractor.

Optional Parts

List of available optional parts and their codes.

Related product manuals

Iseki TM3185F3 User Manual

Table of Contents

Questions and Answers:

Iseki TM3185F3 Specifications

Summary

SAFETY

Machine Purpose

Personal Safety Instructions

Making Your Tractor a Safe Vehicle

How to Maintain Safety

For Safe Operation

How to be a Safe Operator

When Another Person Operates Your Machine

Before Operation

Starting Engine and Operating Tractor

When Traveling

Loading onto or Unloading from a Truck

During Operation

Inspection and Maintenance

Storage

Dismantling and Disposal

Maintenance of the Electric System

To Maintain Electric Wiring

To Handle the Battery

To Handle Booster Cables

Safety Decals

Maintenance of Safety Decals

Location of Safety Decals

INTRODUCTION

TRACTOR IDENTIFICATION

Statutory Plate

Model / Serial Number

Model Type Designation

MAJOR COMPONENTS

OPERATION

Instrument Panel

Main Switch

Indicator Light Array

Tachometer & Engine Hourmeter

Coolant Temperature Gauge

Fuel Gauge

Switches

Clutch Pedal

Brake

Brake Pedals

Parking Brake Lever

Break-in Period

Starting

Pre-Start Inspection

Normal Starting

Restarting Warm Engine

Cold Weather Starting

Warm-Up Period

Operator Observations

Starting Circuit Operation

Engine Speed Controls

Ground Speed Selection

Stopping Tractor

Differential Lock Operation

4-Wheel Drive

Power Take-Off (PTO)

Rear PTO Shaft

PTO Operating Controls

3-Point Hitch

Hitch Controls

Rear Linkage

Attaching Implements

Using Position Control

Detaching Implements

External Auxiliary Hydraulics (Option)

Rear Hitch

Roll Over Protective Structure (ROPS)

How to Tilt ROPS

Seat & Suspension Adjustment

7 Pins Socket

Beacon

Towing

Front Loader Fixation Point

Falling Objects Protective Structure (FOPS) & Operators Protection Structure (OPS) Fixation Point

Jacking