TM3185F3
8
Before Operation
(1) Set up an operation plan with sufficient time al-
lowance. A tight plan may result in unexpected
accidents when work has to be rushed.
(2) Inspect and service the machine periodically in
accordance with the instructions given in the
operator’s manual to maintain the machine in the
best condition.
Pay special attention to the controls, especially
to the brakes and clutch, and safety measures
for the machine when servicing it. If the machine
functions and operates properly, the chance of an
accident will be reduced greatly.
If safety devices are damaged or do not work,
please consult your ISEKI dealer.
(3) Before removing a safety devices, such as a
safety cover, be sure that the machine has
stopped completely. Never forget to replace the
removed part after servicing.
(4) Never refill fuel while the engine is running. Keep
away from open fires and never smoke around a
fuel tank or while fueling into the machine. Never
use open flames for illumination when fueling the
machine at night.
FIG. 6
FIG. 7
FIG. 8
To Next Page
Loading...
Need help?
General
