14
4.18 Talk to Baby
NOTE: While the “Talk to Baby” function is in use, there is no possibility to hear the sounds from the Baby
Unit. Releasing the talk button allows one to hear the sounds from the baby's room again.
All of the following maintenance procedures should only be performed when Baby and Parent Units are
unplugged and off.
• Clean the surfaces of the Baby and Parent Units with a soft, fluff-free cloth.
• Never use cleaning agents or solvents.
• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care not to allow water into
any openings.
11131116 11131118 11131119
• Press and hold the on your Parent Unit to talk to your baby or partner in the baby’s room via Baby Unit.
• Release the button when you are finished talking.
5. Maintenance
To Next Page