3. Getting Started
3.1 Powering the Baby Unit (Camera)
3.2 Powering the Parent Unit
3.3 Charging the Parent Unit
Connect the Camera Power Adapter to the DC-Jack (26) on the bottom of the Baby Unit.
Plug the AC power adapter into the wall outlet.
Ensure the ON/OFF switch (25) is in the ON position.
The unit will power on automatically and the green power LED (3) will light up.
Use the ON/OFF switch (25) to turn the Baby Unit off.
NOTE: Only use the AC power adapter included in this package.
Connect the Parent Unit Power Adapter to the DC-Jack (16) on the right side of the Parent Unit.
Plug the AC power adapter into the wall outlet.
Press and hold the Power button (1) on the top left side of the Parent Unit for 2 seconds to turn the unit on.
Once the Parent Unit is turned on, the green power LED (3) will light up and “Babysense Video” logo will
display on the LCD.
Press and hold the Power button (1) on the top left side of the Parent Unit for 5 seconds to turn the unit off.
NOTE: Only use the AC power adapter included in this package.
NOTE: The parent unit is supplied with a built-in rechargeable Li-ion battery (3.7V 4000mAh).
We recommend whenever possible, to keep the Parent Unit plugged in to keep the battery charged.
Connect the power adapter to the DC-Jack (16) on the right side of the Parent Unit.
Plug the AC power adapter into the wall outlet.
Charging LED (2) on the Parent Unit will light up in RED to indicate charging.
When the unit is turned on, the battery charging icon (changing bars) will appear at the top right corner of
the LCD screen.
Full battery indicator (4 fixed bars) will appear at the top right corner of the LCD screen, indicating the
battery is fully charged. The charging LED (2) will turn green once the battery is fully charged.
NOTE: Before the first use or after a long product storage, it is recommended to fully charge the Parent Unit prior
to operating the monitor. It takes approximately 8 hours to fully charge the battery.
NOTE: The monitor can be operated normally during the charging process.
NOTE: Low Battery Warning - The battery icon turns red on the LCD screen to indicate that the battery is low.
The warning is accompanied with an acoustic beep sound, indicating that the battery needs to be recharged.
** Alert Volume can be adjusted in the parent unit menu, see details in Section "Warning Alert Volume Setting".
To Next Page
Loading...