iSense BabySense HD S2 - Specifications

14
7. Specifications
161822
Product Model
HD-S2
2.4GHz FHSS
GFSK
4 Mbps
3.5 MHz
Up to 960 feet / 350 meters (open space – no obstructions)
5V, 1.0 A
Input: 100-240VAC 50 / 60Hz, 200mA Max;
Output: 5V, 1.0A;
5.0” TFT LCD (1280*720 pixels)
Model: YB905560 3.7V, 4000 mAh
Approx. up to 12 hours (VOX on)
Approx. up to 8 hours (Monitor on)
18dBm M
1/4" Color CMOS
940nm
Indoor use only; Temperature: 32-104°F / 0-40°C
Humidity: 5% to 90% rh. (relative humidity)
Operating time with battery fully
charged (Parent Unit)
* It takes about 8 hours to fully charge
the battery.
Transmitting Power
Image sensor type
IR LED Type
Operation Environment
Rechargeable battery
(pre-installed in Parent Unit)
LCD Screen
Power Adapter
Input Voltage
Transmission Range
Channel Bandwidth
Data Rate
Type of Modulation
Frequency