iSi Gourmet Whip User Manual (English)

Questions and Answers:

M
Michael OrozcoJul 27, 2025
Why is gas leaking between the bottle and head of my iSi Gourmet Whip?
- J
  Jennifer SanfordJul 27, 2025
  To resolve gas leaks between the bottle and head of your iSi Kitchen Appliances whipper, first release the pressure. Then, check for the head gasket. If it's missing, insert it into the head. If the gasket is damaged, it needs replacement with an original iSi spare part. Ensure the head is securely tightened by hand, following the instructions. If the bottle's upper edge is damaged, send the whipper to iSi or a service center.
S
stewartsandraJul 30, 2025
What to do if I cannot remove content or iSi Gourmet Whip Kitchen Appliances whipper sprays?
- B
  briannaaguirreJul 31, 2025
  If you cannot remove the content from your iSi Kitchen Appliances whipper, or it sprays, it could be due to several reasons. There might be a blockage from undissolved ingredients like sugar, in which case you should release the pressure and perform a main cleaning. If the cream or cream-filled preparation has become too stiff, decrease the intensity and frequency of shaking next time. If the content is too firm due to too much binder or cooling, adapt your recipe or technique. Ensure you're using original iSi cream chargers to maintain correct pressure ratios. Also, check that the head was firmly screwed onto the bottle and that the head gasket and decorator tip are properly inserted. If the bottle neck is damaged, release the pressure and send the whipper to iSi or a service center.
J
jared80Aug 4, 2025
Why is gas leaking from the valve or tip of my iSi Gourmet Whip Kitchen Appliances during use?
- B
  bauerkatelynAug 4, 2025
  If gas is leaking through the valve or decorator tip during operation of your iSi Kitchen Appliances whipper, ensure that the decorator tip is attached to the dispensing piston before screwing on the charger. If it still leaks, release the pressure, perform a main cleaning to address a dirty o-ring of the dispensing valve, and then set up the whipper again. If the o-ring is damaged, release the pressure and send the whipper to iSi or a service center.
S
Sarah SmithAug 8, 2025
Why is the content from my iSi Kitchen Appliances coming out too runny?
- K
  Keith LewisAug 8, 2025
  If the content dispensed from your iSi Kitchen Appliances is too runny, first release the pressure and pour out any excess liquid before setting up the whipper again if it was overfilled. Ensure the whipper is adequately shaken according to instructions. If the content isn't cold enough, refrigerate the filled Gourmet Whip for 1–2 hours. Only use original iSi cream chargers. For cream-related issues, refer to iSi recommendations for cream usage. If insufficient gelatin or binder was used, release the pressure, add more binder following instructions, and refill. Ensure the binder is used correctly by following its specific instructions.
S
Stephanie ElliottAug 12, 2025
What to do if the charger won't puncture on my iSi Gourmet Whip Kitchen Appliances?
- J
  Joshua SampsonAug 12, 2025
  If the charger will not puncture on your iSi Kitchen Appliances, ensure you are using only original iSi cream chargers. Also, make sure the charger is inserted correctly according to the instructions. If the issue persists, the puncturing unit may be damaged, requiring you to send the whipper to iSi or a service center.
A
adamsjamesAug 17, 2025
Why is the decal base bending on my iSi Gourmet Whip?
- S
  savannah52Aug 17, 2025
  If the decal base on your iSi Kitchen Appliances is bending outward or coming off, release the pressure. Do not heat the whipper in a bain-marie, microwave, oven, or on the stove. Send the whipper to iSi or a service center.

iSi Gourmet Whip Specifications

General

Material	Stainless Steel
Bottle	Stainless steel
Cold Resistant	Yes
Usage	Professional and home use
Charging Mechanism	Screw-in charger holder
Capacity	0.5 liter or 1 liter (depending on the model)
Compatibility	iSi chargers
Compatible Chargers	iSi N2O chargers