iSinwheel EBIKE D4 - Functions and Settings; Display Information; Control and System Settings; UART Protocol

11
Functions
All on-board Information (With in 1s After Power On)
● 1. On the display
Speed, PAS level, Battery level, Fault indicator, Total travel distance, Trip distance,
Front light sign, Trip time.
● 2. Control and Settings
Power on/off control, Front light on/off control, 6 KM/H walk assist mode control,
Wheel diameter setting, Top speed setting, Auto sleep time setting, Backlight bright-
ness setting, Voltage level setting.
● 3. UART Communication Protocol: UART
Working Current
Maximum Speed
Average Speed
Speed Meter
Metric System: KM/H
Imperial System: MPH
Twist Throttle Fault
Motor Fault
Controller Fault
Brake Reminder
Under-Voltage
Pedal Assist Mode
Battery Level
Front Light
Real-time Cruise
6 KM/H Walk Assist Mode
PAS Level Adjustment
ODO: Total Travel Distance
TRIP: Trip Distance
TIME: Trip Time
VOL: Current Voltage
CUR: Working Current
DST; Not Tet Defined