02
Step 1 Stem Installation
Insert the stem into the head
tube.
1
Adjust the handlebar to make it
perpendicular to the front tire.
2
Open the folding lock.
3
Put down the stem.
4
Tighten the bolt into the head
tube.
5
After tightening the bolt, Lift
the stem and close the
folding lock firmly.
6
90°
● Please read this manual thoroughly and follow its instructions.
● Make sure all parts are intact.
● Do not install the battery or start the computer until the bike is fully installed.
● If you have any questions or can't find the information you need in the manual, Please contact
us via email.
Before Installation
Installation
To Next Page
Loading...
