iSinwheel EBIKE D4 - How to Charge the Battery

07
Remove the rubber cover on the charging port
opposite the battery switch.
2
Turn the key to off position to ensure the battery
is idle.
1
Plug the charger DC connector into the battery's
charging port: When the battery is on or off the
bike, Place the charger on a flat and safe place
and connect the charger's DC output plug to the
charging port on the battery.
3
Plug the charger AC plug into a power outlet to start
charging and the LED indicator will glow red. When
battery is fully charged, the indicator turns green.
Unplug the charger from the wall outlet before
unplugging the charger output plug from the battery
charging port.
4
How to Charge the Battery