eJoni
Step 3 of 13
Handlebar set up
3.6. Loosen the two stem
clamp bolts.
3.7 Using the supplied 5mm hex
key, turn the headset bolt 90°
clockwise to remove the play.
3.8 Re-tighten the two stem clamp bolts.
3.9 Restart the process from step 3.3.
If in doubt, please consult our technical support team on
+44 (0) 1584 708 383 or email techsupport@islabikes.co.uk
To Next Page
Loading...
